Have there ever been any kind of collection of VIN numbers of our cars? I know there is for Eldorado, but is there for all cars?

Basically a register to keep track of the cars that's still around and the history of them.

If anybody want to start such register I volunteer my car:

64K055288. Series 62 Six Window Sedan. Aspen White.

Views: 57

Reply to This

Replies to This Discussion

Anders, sounds like you just volunteered! Here is my # 64J102576 built March 19, 1964!

Was afraid of that.

Just think, I can give you 50 VIN #'s that you will not find... so you can scratch those off your search!

Only present cars. No point chasing long gone ghosts. 

Not planning on chasing anything. Will update the list whenever someone posts a reply.

I'd been thinking of this myself.... me being a selfish prick, was thinking of doing it for the Fleetwood's only, but Anders idea is a much better plan. i'll bung ours into the mix soon. At the time of this post, Clovis, Anders and myself, are on at the same time.

First thing that sprang to mind was Curly Moe and Larry

I reckon it will be really cool if we end up with 2 cars with consecutive numbers.

I hope everyone gets behind this.

Kevin, I don't think we will get many cars into this. But its still worth a try. Biggest concern is the privacy. I am afraid that many people don't want to advertise their personal details. Also I have an issue displaying my details.

Have asked Jason for a slot in the next Newsletter. Will write something to push for this.

Anybody not comfortable displaying the VIN and other info on the site can always add me as a Friend and send the details direct to me. I will keep the info safe and only share VIN and color. So no personal information will be posted at all. The full list will of course be available to Jason or whom is the director of the 63/64 Chapter (think Jason will be around for another 50+ year/scrap cars). 

RSS

Photos

  • Add Photos
  • View All

Forum

Steering Wheel

Started by Mark Borer in General Discussion 2 hours ago. 0 Replies

plz watch this videoIt shows play between the 2 cylinders that make up my columni have tightened everything up as best as I can....but it moves a bitthe lower cover had a screw that lined it up, and…Continue

Exhaust manifold: Repair, replace or headers?

Started by Dutch Dickinsen in General Discussion 2 hours ago. 0 Replies

My newly acquired '64 Coupe DeVille suffers from a cracked right side exhaust manifold.It looks like my options are limited to rolling the dice on a used manifold, converting to headers or seeing if…Continue

Tags: 429, manifold, exhaust

Help! I need a 1964 Eldorado front left fender.

Started by Jorge M in Wanted to Buy. Last reply by Jon Ettman 4 hours ago. 5 Replies

Help looking for a 1964 Eldorado front fender for a convertible.Thank you please contact djjmoreno84@gmail.comContinue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 23 hours ago. 157 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…

Continue

Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.

Thanks

Dominic

Upper A Arm Rubber Bumpers

Posted by Gene McIlroy on August 12, 2019 at 1:30pm 3 Comments

I have found a very good replacement part for the Upper A Arm Bumpers.  The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were.  The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer.  Part number is on the box in the photos.  First photo is the box next to the box is the S10 part and an original.  Next photo shows my sanded down part next to an original.…

Continue

Roof motor

Posted by Dermot Robinson on August 11, 2019 at 8:44am 2 Comments

Replacing my convertible roof motor.

Has anyone any experience or advice on replacing the roof motor on a 1964 Cadillac Deville .

Please..

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service