Hi folks,

I'm new to Cadillacs so bear with me if this question has already been answered but I did a search of the forum and couldn't find an answer.

It appears I have an original master cylinder (based on photos of Jason's setup). The brake booster may also be original.

I would like to have them rebuilt before putting them back in the car so I was wondering if anyone could recommend a place to do the rebuild. Rockauto offers a return and rebuild service but I'm a bit leery of how good the rebuild would be.

Any advice is appreciated!

Chris

Views: 276

Reply to This

Replies to This Discussion

Your photo won't open up, at least for me anyway.

Chris don't post pictures from "Upload Files". Use Image:

Ah, thanks Anders. That works better.

Cardone Inc ---rebuilds MC And break boosters For our cars

Found the info in --part suppliers --on the home page header

Enjoy

Thanks Tony. I'm new to the site so I'm in the fumbling around stage!

This site is ---one of the very best places you could be if you own one of our year Cadillacs for anything related to the cars
The only thing better than this place is having the car out for a ride and causing a sceen where ever you show up
Makes for a lot of FUN
The weather is to -- Die For !!! when i roll out my 64 convertible that has a lot to do with the above reactions
One of my favorite things to do On a super day

Enjoy

It appears that my brake booster isn't original if I compare it to Jason Edge's setup. Can someone confirm this? If I'm correct, I might as well not get this one rebuilt (just do the MC), right?

Chris,

There were two different booster/master cylinder assemblies originally used on the '63s. Delco Moraine which had two studs attaching the MC to the booster and Bendix which had four studs. You have a Delco Moraine booster and what looks like a replacement MC so you may well have an original booster.

Obviously a Bendix booster requires a bendix (4 stud) MC etc. but the entire booster/MC units are interchangeable with maybe just a little bending to make the brake lines fit.

I just had mine done with Steve over at Power Brake Booster Exchange last summer and he was very reasonable. My suggestion would be to buy a decent condition used one to rebuild and send it to him. He's located in Oregon and his rates were very fair compared to the competition. I did a lot of research before deciding on their company and was very happy with the results.

http://www.boosterdeweyexchange.com/dev/

Thanks for the link Christopher.

Karps Brakes 909 985-0800 rebuilt 2 sets for me.  Good work and fair price. A lot of restoration shop use him.  

- The 1963 and 1964 Cadillacs came with either a Bendix or Delco Morraine brake booster & master cylinder.

- The 1963 and 1964 brake setups changed for both brands from 1963 to 1964. (i.e. 1963 Bendix different from 1964 Bendix and 1963 Delco different from 1964 Delco)

- My 1964 Coupe de Ville has the 1964 Delco Morraine brake setup.

- There are examples of these in your shop manual. There are also examples on the following Help page if you scroll through: Brake Illustrations and Pictures

- I do have some original style boosters of master cylinders that would be good for rebuild for $45 for either the booster or master cylinder if you want to send out to restore so you have an original setup for your year car. If you need something email me at jasonedge@nc.rr.com and state model year and brake brand preference if any.

RSS

Photos

  • Add Photos
  • View All

Forum

off the wall question

Started by James Fejerang in 1963/64 Cadillac Specific Discussion. Last reply by Ray Schick 9 minutes ago. 1 Reply

 Could anyone please tell me why on some models of the 64 devilles, the Bezel, Turn signal (LH upper) is clear and the other one RH Bezel is chrome.  Sorry if this is a stupid question, but i have…Continue

fuel pump

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Anders 2 hours ago. 4 Replies

I am gathering up some stuff to put away for the potential trip home in oct/nov from MT to MS in the 63 cdv.i thought a fuel pump may be a good piece to have nearby,  Are the newer ones like you can…Continue

rear seat speaker grill

Started by Kenneth R Hudgins in 1963/64 Cadillac Specific Discussion 11 hours ago. 0 Replies

Looking for a rear seat speaker grill for my 63 EldoradoContinue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 159 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

Starter Solenoid replacement-how difficult? Where to buy?

Posted by Norman Silverman on August 20, 2019 at 8:24pm 8 Comments

Hello All.

I believe the starter solenoid has gone bad in my 64 DeVille. When I turn the key, often all I get is a click, then if I try a few times again the starter turns perfectly. All battery cables are on tight and the battery is good. So, I believe this problem is the solenoid. Where do I buy the right solenoid and is it necessary to remove the starter in order to swap it out? …

Continue

Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…

Continue

Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.

Thanks

Dominic

Upper A Arm Rubber Bumpers

Posted by Gene McIlroy on August 12, 2019 at 1:30pm 3 Comments

I have found a very good replacement part for the Upper A Arm Bumpers.  The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were.  The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer.  Part number is on the box in the photos.  First photo is the box next to the box is the S10 part and an original.  Next photo shows my sanded down part next to an original.…

Continue

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service