Hi folks,

I'm new to Cadillacs so bear with me if this question has already been answered but I did a search of the forum and couldn't find an answer.

It appears I have an original master cylinder (based on photos of Jason's setup). The brake booster may also be original.

I would like to have them rebuilt before putting them back in the car so I was wondering if anyone could recommend a place to do the rebuild. Rockauto offers a return and rebuild service but I'm a bit leery of how good the rebuild would be.

Any advice is appreciated!

Chris

Views: 353

Reply to This

Replies to This Discussion

Dave

Where is Karps located ?
Like the 62 CDV in the photo

Enjoy

Karps Brakes

66 North Central Ave.

Upland, CA 91786

Dave

Thanks for the location

Enjoy

Thanks for all the information folks. Much appreciated!

Is it worth rebuilding the MC or buying a replacement? I see the Cardone ones are available for around $60.

Depends on what you are going after. If you want originality, and Cardone is offering a rebuilt original with warranty for $60 then it would be a no brainer. If it is aftermarket and not too concerned with originality then it would still be a no brainer. If you want originality and it is not original, then you need to determine rebuild cost. 5 years or so ago, you could go to the AutoZone.com site and order an original rebuilt Delco booster and Master Cylinder for around $100 to $150, which is what you see on my car. There was no need to go through the rebuild effort since I could order and have an original on my doorstep in 2 to 3 days. Since then things have changed and do not see the readily available rebuilt units, but again have not been searching lately either. So... if Cardon has them rebuilt with warranty for only $60 I would jump all over it.

Great, thank you Jason.

I'm not super concerned about originality but I am leaning in that direction at this point.

Best,

Chris

Yep I'm late to the party but just wanted to let you know how lucky you are to have a Delco moraine setup. I have the Bendix. When my MC went I paid a very high price for a replacement Bendix.

--Jake

Its not a big thing changing between the two brands. Hardest part is to connect the push rod below the dash. You might also have to change the length of the master cylinder push rod.

See: Brake booster push rod adjustment.

Just a little info; the Delco Morane M/C will fit onto a Bendex booster.  The top 2 studs are used and it lines right up.

What is the green small convertible parked beside the Cadillac? Looks like it could be parked in the trunk of the caddy...

I got my booster rebuilt for $120 Canadian and bought a new MC for $60 so I’m oretty happy!

It’s a 1974 MGB with a Buick V8 stroker- ~300 hp and over 400 ftlbs of torque in a 2200 lb car. It’s pretty fun but not easy to fit the family in it!

Chris are you Canadian? I see Nevada on the caddys license plate. 

RSS

Photos

  • Add Photos
  • View All

Forum

New photo gallery

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 1 hour ago. 8 Replies

Having trouble posting my picture in the new gallery but managed to get the text right The computer WIZ - I am NOT ! Stay safe my friends Continue

New Car Gallery Page Created - Post a Picture of your 1963/64 Cadllac

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 2 hours ago. 4 Replies

Hello 63/64 Cadillac Website Members,Hope you are all staying safe amid the Coronavirus shutdown and wanted to share something new & fun on the 63/64 Cadllac Website at…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 3 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

1963 coupe deville front relocation shock kit

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion. Last reply by Jason A 12 hours ago. 6 Replies

Howdy everyone had a question maybie you guys can help me,I have a 1963 coupe deville and i got it with air bags problem is its way to bouncy in the front need to get a shock relocatio ok n kit but I…Continue

Blog Posts

How to sensibly deal with the Corona Virus

Posted by Jeff Kinzler on March 14, 2020 at 5:02pm 6 Comments

https://theamericanscholar.org/covid-19-a-primer/

I found this very helpful, written by a knowledgeable authority in public health. 

Remember, Viruses are not spread by Cadillacs so get out and drive!


Safe & Healthy travels. 

Jeff Kinzler

1963 Eldorado convertible boot

Posted by Les Eastling on February 27, 2020 at 10:33am 1 Comment

I need a used convertible boot for a 63 Cadillac convertible - condition or color is not an issue since it will be used as a pattern for making a new one. One from either a 62 series convertible or an Eldorado would work. I know I am searching for hen's teeth here... but you never know unless you ask!

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service