hey guys my driver and passenger front windows go up real slow sometimes pull them up with my hands for assistance. somebody said that the window motors were weak. Is there a certain voltage they should be putting out. wanted to get you guys input before I waste time pulling them out

    

Views: 40

Reply to This

Replies to This Discussion

James, Slow windows can be a combination of things including weak motors, dried grease in motor gear, dried grease in the channels, or broken rollers/glides on the windows/regulators.   The original grease often dries up as seen on the rear qtr window sash cam channels seen below from my 1964 Coupe de Ville.  This makes it much harder for the motor to put the window/regulator rollers/glides through the channel. Motors also become weak and worn out over time. Motors are operated with 12 volts (they do not put out voltage), and should be turn strong in either direction. You an remove the motor and remove the gear and clean the cavity and regrease. Wheel bearing grease or white lithium grease are good. Once cleaned and regreased you can bench test. With no load on the bench the motor should turn very slow. 
If you need a window motor I have motors and gears, cleaned, greased and tested for $45. (with the exception of the rear qtr convertible gear which is different from the other gear used). If you end up needing a motor shoot me an email to jasonedge@nc.rr.com. 

As an example of the old dried grease, below are the sash cam channel and rear guide with the old caked in grease and a picture below of the channels cleaned and coated with white lithium grease:

IMG_6688

 

IMG_6690

ok. thanks

Excellent price for a window motor.

RSS

Photos

  • Add Photos
  • View All

Forum

Where to get brake booster and master cylinder rebuilt

Started by Chris Gill in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 49 minutes ago. 23 Replies

Hi folks,I'm new to Cadillacs so bear with me if this question has already been answered but I did a search of the forum and couldn't find an answer.It appears I have an original master cylinder…Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Tony and Ginny 429 50 minutes ago. 149 Replies

I have posted a…Continue

Tags: classic cadillac parts, classiccadillacparts

Bypassing the suction throttle valve

Started by Russ Austin in General Discussion 2 hours ago. 0 Replies

Cant find the post where the suction throttle valve was bypassed with an adjustable part.   What was it?Continue

1962 CADILLAC COUPE 62 SERIES SHARP CAR

Started by DanielAndrew in For Sale. Last reply by Dave Schneider 11 hours ago. 7 Replies

1962 CADILLAC COUPE 62 SERIES SHARP CAR On Ebay…Continue

Blog Posts

64 Recirc/Fresh Air Door Actuator replaced; FROM THE INSIDE.

Posted by Norman Silverman on February 4, 2019 at 11:21pm 8 Comments

I am happy to report that I have successfully replaced the Fresh Air/Recirc door actuator that is located on the blower box-and have done so without having to remove the blower box. I did it by taking out the glove box and attacking it from the back.  It took several days, LOTS of patience and some band-aids, but it is done. THE most difficult part -BY FAR- is to remove and then replace the screw that sits on the actuator arm, connecting it to the fresh…

Continue

Flashers

Posted by Mike Petrey on January 13, 2019 at 12:25pm 7 Comments

Where do the flashers go in my 64 Deville Convert.  I'm thinking that's why both turn signals stopped working.

Source for Motor mounts and Trans mounts 1964 SDV

Posted by Norman Silverman on January 9, 2019 at 4:23pm 4 Comments

Hi.

Where is the best place to purchase good quality motor mounts/trans mounts for my 1964 SDV? I see that Rock Auto has them for $8 and change, and others for $24 and change. Big difference. Is there a better place to buy them from?

Thanks

Norm

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service