My '64 CDV is starting to have torque converter issues. I'm going to pull the trans and send it to a shop I trust. Even thought I don't have any trans issues (except for a leak at the modulator)…Continue
I was trying to remove valve springs in 63 head. I got the jaw type tool that you hook on the bottom and top of spring andvscrew downward, I put a socket under the bottom of the valve to keep it…Continue
Hi guys, wondering if anyone can recommend a good source for rebuilt Carter AFB carb for 1963? I see there are many sources out there but it's a chunk of change and I'd feel better working with a…Continue
My car is gone so I have no need for the extra parts I have lying around. I will charge only actual shipping to be determined by buyer's address.More photos of anything available by request. prices…Continue
I'm trying to remove the rear seatback on my 1964 deville conv. The only help on this site that I can find is the following:
The seatback, its bright stainless trim, and the speaker grille are removed as an assembly. The seat back hangs on two hooks near the top, and is retained to the body by two bolts and washers near the floor, one on the right side, one on the left.Once these fasteners are removed, lift the seat back upward and free it from the hooks
Are the front and rear seat frames the same for 63/64 Coupes and Convertibles because Original parts group makes reproduction seat covers for 1963 only and and i prefer the 1963 seat pattern so with that being said does anyone have information regarding this thanks.