Hi all,Picked up the Caddy on May 29th in Miami and drove to Ocala, FL to visit a good friend who used to live in Curaçao. Have taken the opportunity to test everything out on the Deville before the…Continue
Your car has an interesting body plate. It identifies the car as a 64 model (64-6357) but if you notice in the left corner, the car was build in the second week of June (06B). It could be that this car was build in 1963 which does have the…"
"I'm always looking to attend a car show and the Cars & Coffee at Woodlands, TX wasn't a disappointment . Vehicles of all types and years were present and the Deville was the only Cadillac present. Got a lot of attention seeing the…"
"Another day of driving in Texas. Took the scenic route along the coast of Bolivar Peninsula. Lot's of houses on stilts including the school and church that are high above ground.
Had to wait in line for 2 hours for boarding the ferry and…"
It's been awhile. I'm in the Houston area going to San Marcos for the CLC Grand National. Would be great to meet you and the convertible. Don't now if it's possible to set up a meet this Sunday.
Thought I would share a quick story regarding something I did that I generally do not recommend - Free handed drilling a broken front engine cover bolt. Before I jump into it I will say I do not…Continue
My newly acquired '64 Coupe DeVille suffers from a cracked right side exhaust manifold.It looks like my options are limited to rolling the dice on a used manifold, converting to headers or seeing if…Continue
plz watch this videoIt shows play between the 2 cylinders that make up my columni have tightened everything up as best as I can....but it moves a bitthe lower cover had a screw that lined it up, and…Continue
I believe the starter solenoid has gone bad in my 64 DeVille. When I turn the key, often all I get is a click, then if I try a few times again the starter turns perfectly. All battery cables are on tight and the battery is good. So, I believe this problem is the solenoid. Where do I buy the right solenoid and is it necessary to remove the starter in order to swap it out? …
I have found a very good replacement part for the Upper A Arm Bumpers. The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were. The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer. Part number is on the box in the photos. First photo is the box next to the box is the S10 part and an original. Next photo shows my sanded down part next to an original.…