I’m less than happy with my purchase due to fitment issues. I could not get the bulbs to fit the fins. All the others on the rear fit, the brake lights were not easy to put in, the issue is the bulb…Continue
I’ve been a member for a while, but I believe this is my first post. Before I became a member on here, I owned a ‘64 Coupe deVille ( it was my first Cadillac). Unfortunately, I ended up selling it 4…Continue
"These are the type I bought on eBay. I put an o-ring behind them to make it waterproof. I used several different kinds. The side marker lights have two amber for night time driving and two for side flashing turning indicators. Fronts are a similar…"
"I tried to relieve the bulb base with a file and the base and bulb separated on me. The AZ ones went right in. I’m going to see if I have the same issues with these Super Bright bulbs on my ‘72 Coupe...If I don’t I’ll order a…"
"I bought them on Ebay and then drove down to Simi Valley to replace a defective one, and to also purchase the second set for my Datsun mini truck. The great thing about these is the fact: They are truly plug and play: The cooling fans are…"
"I managed to get my ebay LEDs to fit my fin lights. I had to do a tiny bit of easing back on the bulb corner that fits the socket. I used a bench grinder to knock off the corner of the aluminum base to let them sit a fraction deeper into the socket.…"
"Like as much detail as possible on the headlight bulb purchase-upgrade ---the vendor -( autozone ? ) -cost and the part numbers for the low and high beams This could be a nice upgrade in many rural area were lighting on the roads is not the best it…"
"This was not a standard Cadillac dealer installed option. With that said, Cadillac dealers will and have installed aftermarket and other brand items throughout the course of automotive history. (My '02 Escalade has a host of Vogue and…"
"When I bought my car, it had some of the wiring and that same box next to the horns. The labeling was all gone and I had no idea what it was so I removed it. Inside the box were some electronics and a couple vacuum tubes, I assumed it…"
I’m less than happy with my purchase due to fitment issues. I could not get the bulbs to fit the fins. All the others on the rear fit, the brake lights were not easy to put in, the issue is the bulb base is too short and therefore not allowing the bulbs to seat. I put AutoZone led’ in the fins, not as nice... but they did fit. As for the front I could only get the cornering lamp led’ to fit. The turn signals, I again, went with AZ led’, but then had to change them out for just regular amber…See More
"To get back to the ---Door Bell button Well its purpose was --door related ! ( and just a very lucky guess on my part )
This has to be one of the earlier garage door openers -- ever -to be in our year cars Kind of a newer high tech electronic…"
If nothing else --i finally learned how to spell--THERMOSTAT --the right way ! Now thats ---a WIN --Win--FOR SURE !------ PMSL !!!!!!!!!!!!!!!!!!!!!!!!!!!
Kevin --will be enjoying this ---i think somehow ( you know --the very CLASSY…"
Thanks very much for --your support -and thoughts on the termistat temperature subject I have a high regard for your opinion watching you do your own restoration and picking up some good info from you along the way Race engines running at…"
My driver side tail light does not work. The lights on the fin works, passenger side works. Check the fuses everything looks good. Should I follow the wire from the tail light and where does it run…Continue
My '64 Cadillac DeVille had been sitting for awhile while I was travelling this summer and when I came home it had some issues starting. After replacing the plugs and the ignition coil, it was running better than it had in a long time but the brakes were sticking. I noticed the brake pedal was traveling a little farther than usual when slowing down. Soon after I noticed a hissing noise coming from around the brake pedal. Then I lost the brakes pretty much completely. I couldn't find any…
I got the book to troubleshoot the system. INDISPENSABLE to this effort.
As I do a cursory exam, I see that the AC RECIRC SOLENOID is Cracked (the WHITE one in the engine compartment coming out of the HVAC body with two vacuum hoses on it). I tried to patch it up (cracked all around the base), but it does not look like it will hold.
PLEASE TELL ME THAT REPLACING THIS PART IS NOT AS DIFFICULT AS I THINK IT IS, But I think it is a bear to…
My 63 CDV factory A/C was trash so I replaced every part in the system and converted to R134 . I also installed a STV bypass kit which eliminated the STV all together and converted the system to a cycling system. I vacumed and charged the system with 36oz of 134. The system is cycling as it should and the pressures are right at 250 high side, cycle off at 25lbs and cycle back on at about 35lbs. It is making plenty of water on the low side hoses and evaporator drain. There is very good air…