My driver side tail light does not work. The lights on the fin works, passenger side works. Check the fuses everything looks good. Should I follow the wire from the tail light and where does it run…Continue
"Clean all conections to shinny metal
The wiring going into the plug can be removed ( backed out ) from the plug by slipping a small flat tool into the socket Removing the wire from the plug will help you access the terminal to clean to well They…"
Real nice extremely detailed taillight electrical repair info A lot of variables going on there Electrical issues can be challenging
Nailed the subject
I took some notes as i often do
I have an accordian file of all detail notes from the…"
"I use folded aluminum foil to fill the gap between the fixture and the bulbs base so contact is made after the WD -40 to work the spring For any side to side movement a toothpick and a dab of crazy glue will stabilize the bulb Prevents bumps from…"
"Testing the tail light is made easy since the connector is just inside the license tag/gas door on the back trunk wall. Looking at pictures below, just flip the gas door down, reach over and unplug the connector on the left at back trunk wall, and…"
My driver side tail light does not work. The lights on the fin works, passenger side works. Check the fuses everything looks good. Should I follow the wire from the tail light and where does it run to. Is it in the trunk or underneath the car. Thanks
"Welcome to the 63/64 Cadillac Website.
This site is hosted by the CLC (Cadillac LaSalle Club) 1963/64 Cadillac Chapter. Joining the website is free to everyone, however, you must be a CLC member to join the Chapter. - Click…"
I just watched an episode of a show called Iron Resurrection on Velocity Channel. They did a restomod on a pretty clean survivor '63 CDV for a customer. They did an LS3 swap, air ride, complete…Continue
I removed both 7 nipple vacuum valves and called my buddy who owns a machine shop. Tomorrow we'll re-surface the valve faces and then I'll reinstall them. HOWEVER, the one that comes out easily and comes apart with no rivet is on the Power module side. It installs on one side with a small bolt, and on the other it is held on by a clip, WHICH IS MISSING ON MY CAR. I am going to assume it is the same clip that is used on the Control Module side. Anybody got one? Happy…
So, I've put my 7 vacuum valve from the control head side to the test, and it failed. I looked at the instructions for re-conditioning it and unless I am missing something, the instructions are missing something (about how to take off the clip that provides the tension that holds the two pieces together).
In any case, I can't do this particular repair so I am looking for a new valve (not likely), or a good re-conditioned one, or someone who has done this before and would do mine for…