My driver side tail light does not work. The lights on the fin works, passenger side works. Check the fuses everything looks good. Should I follow the wire from the tail light and where does it run…Continue
"Clean all conections to shinny metal
The wiring going into the plug can be removed ( backed out ) from the plug by slipping a small flat tool into the socket Removing the wire from the plug will help you access the terminal to clean to well They…"
Real nice extremely detailed taillight electrical repair info A lot of variables going on there Electrical issues can be challenging
Nailed the subject
I took some notes as i often do
I have an accordian file of all detail notes from the…"
"I use folded aluminum foil to fill the gap between the fixture and the bulbs base so contact is made after the WD -40 to work the spring For any side to side movement a toothpick and a dab of crazy glue will stabilize the bulb Prevents bumps from…"
"Testing the tail light is made easy since the connector is just inside the license tag/gas door on the back trunk wall. Looking at pictures below, just flip the gas door down, reach over and unplug the connector on the left at back trunk wall, and…"
My driver side tail light does not work. The lights on the fin works, passenger side works. Check the fuses everything looks good. Should I follow the wire from the tail light and where does it run to. Is it in the trunk or underneath the car. Thanks
"Welcome to the 63/64 Cadillac Website.
This site is hosted by the CLC (Cadillac LaSalle Club) 1963/64 Cadillac Chapter. Joining the website is free to everyone, however, you must be a CLC member to join the Chapter. - Click…"
Thought I would share a quick story regarding something I did that I generally do not recommend - Free handed drilling a broken front engine cover bolt. Before I jump into it I will say I do not…Continue
Hi gang. While reviewing the extensive photo archives on this site, I came across an excellent series of photos documenting a trunk pull-down assembly posted by Jason Edge. I really didn't even…Continue
I believe the starter solenoid has gone bad in my 64 DeVille. When I turn the key, often all I get is a click, then if I try a few times again the starter turns perfectly. All battery cables are on tight and the battery is good. So, I believe this problem is the solenoid. Where do I buy the right solenoid and is it necessary to remove the starter in order to swap it out? …
I have found a very good replacement part for the Upper A Arm Bumpers. The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were. The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer. Part number is on the box in the photos. First photo is the box next to the box is the S10 part and an original. Next photo shows my sanded down part next to an original.…