Todd Lentz
  • Male
  • Litchfield Park, AZ
  • United States
Share on Facebook
Share

Todd Lentz's Friends

  • Russ Austin
  • Jason Edge

Todd Lentz's Discussions

Water pump video

Started this discussion. Last reply by Tony and Ginny 429 Oct 18, 2016. 12 Replies

Ok, Ya'all, I know im intermittent but its been a few years now and my hunk of rebuilt junk is still not running.  To catch up, I rebuilt motor, burned oil, got warranty from machine shop (Just bring…Continue

Head Gasket

Started Oct 31, 2015 0 Replies

It appears many holes were not open when heads were pulled. Is it a wrong gasket or flipped gasket?

Head Gasket

Started Oct 31, 2015 0 Replies

It appears many holes were not open when heads were pulled. Is it a wrong gasket or flipped gasket?

Cam grind opinions

Started this discussion. Last reply by Tony and Ginny 429 Mar 6, 2017. 22 Replies

Guys, I hope I'm not beating a dead horse, I have a hard time navagating the 63 64 site on my phone. Anyway...80-1818268/268218/218.300/.300.480/.480108/112HydThis is the grind off of the cam card.…Continue

 

Todd Lentz's Page

Profile Information

Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
1964 Cadillac Sedan DeVille
Cadillac LaSalle Club Member? If Yes, Membership #?
#28743
1963/64 Cadillac Chapter Member?
not yet

Todd Lentz's Photos

  • Add Photos
  • View All

Todd Lentz's Blog

Clock removal

Posted on October 9, 2015 at 11:33am 2 Comments

Hey all, Couldn't get my clock out yesterday so I had a rare moment of clarity. Rubber band from the band used to hold broccoli together. After 20 minutes of cussing, put it on, worked like a charm.

Merry ChristMas and Happy New Year

Posted on December 28, 2014 at 10:17pm 1 Comment

Thank you to all that have given advice and shared their triumphs a and miseries. I have learned so muche and wouldn't have been able to get my baby going without you. Of course a special thanks to Jason and Russ! Best of luck with your new year!

Geeeeeeeeeeeeeeeeeeeeeeez!!!!!!

Posted on August 5, 2014 at 9:47am 4 Comments

If its gonna happen, its going to happen to me.  12mm socket in distributor hole, need I explain more?  half a day of trying to get it out, and on to my next adventure with this motor.  Fixed the O ring issue that the builder messed up completely, now I working on the gas leak from the glass jar I found when trying to start it, which is another story.  Ive got spark, gas, compression...no start.  Im hoping someone can help identify a few wires from some pictures, because I am completely lost…

Continue

Dual Exhaust complete

Posted on July 31, 2014 at 12:50pm 19 Comments

Well the motor is in, and almost ready for its break in.  Got the exhaust finished yesterday and I am very happ[y with it.…

Continue

Comment Wall (2 comments)

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

At 7:19pm on September 29, 2013, Russ Austin said…

Marcellus, to answer your question you posted on the chatt site;  you do not need to take the tranny out with the motor.

I just finished my motor install on my 63, so if you have any questions, I'll help out.

BTW, I'm in Tucson.

At 6:40am on June 8, 2013, Jason Edge said…

Welcome to the 63/64 Cadillac Website.  

Be sure and check out all the links and pages and make yourself at home.  

Jason

 
 
 

Photos

  • Add Photos
  • View All

Forum

Wanted: retaining clips for dash pad legs

Started by Mark Geertsma in Wanted to Buy. Last reply by Russ Austin 6 hours ago. 1 Reply

Looking for the retaining clips (L+R) that the "legs" of the dashpad snap into. Mine are missing. Continue

1964 429 & Trans For Sale

Started by Russ in For Sale 14 hours ago. 0 Replies

Anyone in need of a 429 & trans? Was running when pulled from car but had low compression on a few cylinders if memory serves me right. Engine/trans are in Phoenix. Russ, 562.858.6926Continue

Center bearing - replacement.

Started by Anders in Restoration Discussion. Last reply by Norman Silverman 17 hours ago. 22 Replies

Had some sound from the propeller shaft and as the rear wheel bearings just been replaced I thought it would be the center bearing. Removed the propeller shaft and checked the center bearing (as per…Continue

1964 coupe de ville trunk v emblem

Started by ANGELO MARTINEZ in Restoration Discussion. Last reply by James jacques yesterday. 1 Reply

hello I am looking for the v emblem on a 1964 coupe de ville trunk  v emblemthank youContinue

Blog Posts

64 Recirc/Fresh Air Door Actuator replaced; FROM THE INSIDE.

Posted by Norman Silverman on February 4, 2019 at 11:21pm 8 Comments

I am happy to report that I have successfully replaced the Fresh Air/Recirc door actuator that is located on the blower box-and have done so without having to remove the blower box. I did it by taking out the glove box and attacking it from the back.  It took several days, LOTS of patience and some band-aids, but it is done. THE most difficult part -BY FAR- is to remove and then replace the screw that sits on the actuator arm, connecting it to the fresh…

Continue

Flashers

Posted by Mike Petrey on January 13, 2019 at 12:25pm 7 Comments

Where do the flashers go in my 64 Deville Convert.  I'm thinking that's why both turn signals stopped working.

Source for Motor mounts and Trans mounts 1964 SDV

Posted by Norman Silverman on January 9, 2019 at 4:23pm 4 Comments

Hi.

Where is the best place to purchase good quality motor mounts/trans mounts for my 1964 SDV? I see that Rock Auto has them for $8 and change, and others for $24 and change. Big difference. Is there a better place to buy them from?

Thanks

Norm

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service