"Hi Russ my 63 oil housing is scored and can’t source one so I’m looking at what you mentioned fitting a 64 set of gears and honing it out. Is this straight forward for an engine reconditioner to do? I’ve purchased a 390 engine…"
"Hi Eric I’m restoring a 63 Fleetwood Sixty Special in New Zealand running a rebuilt 390
My mechanic said I should look at fitting the Holley Sniper EFI system but your one looks good and by the reviews seems to perform well too and cheaper…"
"Welcome to the 63/64 Cadillac Website.
This site is hosted by the CLC (Cadillac LaSalle Club) 1963/64 Cadillac Chapter. Joining the website is free to everyone, however, you must be a CLC member to join the chapter. - Click…"
plz watch this videoIt shows play between the 2 cylinders that make up my columni have tightened everything up as best as I can....but it moves a bitthe lower cover had a screw that lined it up, and…Continue
My newly acquired '64 Coupe DeVille suffers from a cracked right side exhaust manifold.It looks like my options are limited to rolling the dice on a used manifold, converting to headers or seeing if…Continue
I have found a very good replacement part for the Upper A Arm Bumpers. The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were. The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer. Part number is on the box in the photos. First photo is the box next to the box is the S10 part and an original. Next photo shows my sanded down part next to an original.…