Ron Perry
  • Male
  • East Haddam, CT
  • United States
Share on Facebook
Share on Facebook MySpace

Ron Perry's Discussions

Picture of a1964 Cadillac Sedan de Ville exhaust hanger bracket behind the muffler, installed.

Started this discussion. Last reply by Kurt Feb 12. 1 Reply

Hello, does anyone have a picture showing the bracket, which is directly behind the muffler, showing it installed and how the metal tab sits in the insulator.  Thank you, Ron Perry,Continue

Yaw bumpers

Started Feb 22, 2023 0 Replies

Hi Jason thank you for your reply. Your picture shows the bumper nearer to the front of the car my picture shows it towards the rear of the car (from the back of the crossmember) My bumper does look…Continue

Yaw bumpers

Started this discussion. Last reply by Jason Edge Mar 10. 11 Replies

I have sent 2 photos of the Transmission yaw bumpers (side mounts) It appears they only touch the trans bellhousing on the very edge. Is that the correct position? Does not seem right to me but I…Continue

64 tranny mount

Started Sep 27, 2022 0 Replies

Hi Guys Hoping someone could recommend a vender where I can purchase a transmission mount for my 64 Sedan De Ville.  Thanks!Continue

 

Ron Perry's Page

Latest Activity

Jason Edge replied to Ron Perry's discussion Yaw bumpers
"There is a slot for lateral adjustment. In fact that is how they go in... in stall with nut & washer loose and slight up next to the transmission bell housing and tighten. If yours are a bit worn but still OK you can slide inward a bit to…"
Mar 10
Logan Robb replied to Ron Perry's discussion Yaw bumpers
"May be worth inspecting the yaw mounts before jumping in too deep. Mine still might be good. Might be a good Sunday afternoon project.  To your knowledge, is there any adjustment in these at all?"
Mar 10
Jason Edge replied to Ron Perry's discussion Yaw bumpers
"Steel rubber is $245 to revulcanize with 3 week turn around time ... making the $305 price from Caddy Daddy not so bad. Still might want to search. Haven't check Rock Auto yet. Here is the Steele…"
Mar 10
Logan Robb replied to Ron Perry's discussion Yaw bumpers
"Thanks for the link! Yeah, CD is always pricey, but in my experience, you are getting a good product."
Mar 10
Jason Edge replied to Ron Perry's discussion Yaw bumpers
"Like I thought, Caddy Daddy has them ready to go but they are not cheap, $305. Link: https://www.caddydaddy.com/catalogsearch/result/?q=yaw+mount You might shop around."
Mar 10
Logan Robb replied to Ron Perry's discussion Yaw bumpers
"Yeah, rubber ready to ship would be preferable. Shouldn't need cores. Caddy Daddy appears to have them but as with all thing CD, they are a bit spendy. "
Mar 10
Jason Edge replied to Ron Perry's discussion Yaw bumpers
"Steele Rubber (www.steelerubber.com) can revulcanize (add new rubber) to you old mounts.  I would check Caddy Daddy, and the other usually suspects for ready to ship yaw mounts with new rubber. If you need good cores I have them for $15…"
Mar 10
Logan Robb replied to Ron Perry's discussion Yaw bumpers
"This is a good photo! Is there a reputable source for these yaw bumpers? Id like to replace mine while I've got my teeth up in this area when doing the trans replacement. "
Mar 10
Kurt replied to Ron Perry's discussion Picture of a1964 Cadillac Sedan de Ville exhaust hanger bracket behind the muffler, installed.
Feb 12
Ron Perry posted a discussion

Picture of a1964 Cadillac Sedan de Ville exhaust hanger bracket behind the muffler, installed.

Hello, does anyone have a picture showing the bracket, which is directly behind the muffler, showing it installed and how the metal tab sits in the insulator.  Thank you, Ron Perry,See More
Feb 12
Ron Perry posted discussions
Feb 22, 2023
Jason Edge replied to Ron Perry's discussion Yaw bumpers
"Maybe this pictures will help. Note yaw mount pushing up against the bell housing above the oil pan."
Feb 22, 2023
Jason Edge replied to Ron Perry's discussion Yaw bumpers
"I looked at the CLC database and my Chapter notes and show own a 1964 Sedan de Ville Four Window (6339) so you would have the Turbo Hydra-Matic transmission and need the longer THM Yaw Mounts. Can't tell from the pictures from m phone what I am…"
Feb 22, 2023
Jason Edge replied to Ron Perry's discussion Yaw bumpers
"Yaw mounts are mounted above  the crossmember pointed up against the curved area of the bell housing. There were two types of Yaw Mounts: a shorter one used the Hydra-Matic transmissions and a longer one used with the Turbo Hydra-Matic. I am…"
Feb 22, 2023
Ron Perry posted photos
Feb 22, 2023
Ron Perry posted a discussion

64 tranny mount

Hi Guys Hoping someone could recommend a vender where I can purchase a transmission mount for my 64 Sedan De Ville.  Thanks!See More
Sep 27, 2022

Profile Information

Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
64 4 window
Cadillac LaSalle Club Membership Number? (Must be a member to Join Chapter & Website)
26153
1963/64 Cadillac Chapter Member?
yes

Ron Perry's Photos

  • Add Photos
  • View All

Comment Wall

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

  • No comments yet!
 
 
 

Photos

  • Add Photos
  • View All

Forum

Modern radio antenna …

Started by Mack in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

Just replaced radios for the modern radios with Bluetooth and all the dance things and wanted to share how I went around the antenna knob… I’ve installed a regular two way GM window switch in the…Continue

BOOT

Started by John Inglesby in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith on Tuesday. 1 Reply

I recently purchased a new boot for my 64 convertible and was wondering how difficult it s to install. I'm not very mechanical. It looks like the chrome piece behind and at top of seats needs to be…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje on Monday. 8 Replies

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 9 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service