Newby question here! I've read through the shop manual and as many threads as I could find on here, but I'm still stumped on exactly how to remove the interior plastic Heater/AC box from my 64 SDV…Continue
"Kurt, is correct. You can edit replies but note you have 15 minutes to do edits. After that you would need to delete and re-post. You can edit a top the main topic discussion post that you created at any time."
I want to know ( from you or others ) how you will be dealing with the hood hinge that is so very close to the blower motor box area
I do think the blower box can be removed with the hinge in place but not 100% sure…"
"Thanks to all for the good advice and explanations. I’m going to get back on it tomorrow and will update with my progress. I’ll remove the blower box and see what all I find. Good idea to replace what I can while I’m in there as…"
"Remove the blower box. You will want to change the vacuum motor in there also. Remember, in for a penny, in for a pound. Dont bother separating the short duct from the blower case to the evap box.
You may find another bolt or nut holding…"
"Sure something else needs to be removed based on your description
Only advice I can give not having done that job yet —but due to do it very soon myself
A post by - Clovis on here could be very informative regarding restoring the…"
Newby question here! I've read through the shop manual and as many threads as I could find on here, but I'm still stumped on exactly how to remove the interior plastic Heater/AC box from my 64 SDV in order to replace the mode door vacuum actuator and heater core. I think I've done everything as indicated, but I can pull so hard on it that it moves my body towards it and it isn't budging. I don't want to break anything, so any help/photos/advice on what I'm missing would be appreciated. Here…See More
"Welcome to the 63/64 Cadillac Website.
This site is hosted by the CLC (Cadillac LaSalle Club) 1963/64 Cadillac Chapter. Joining the website is free to everyone, however, you must be a CLC member to join the Chapter. - Click…"
As most of you know I just brought in almost 400 lb of Cadmium plated bolts, etc. Cheryl, my boss and Cadillac Parts Apprentice indicated she needed some help when looking at the 1st batch of about…Continue
For less than thirty dollars, I ordered a universal '53-'64 headlight switch from vintagecadillac.com The switch is currently out of stock, but I'd really like to sew up the dashboard on my '63 and…Continue
Has anyone bought from Jamco? If so what did you think of there parts as far as there brake booster and M/C set up combo's.The reason for asking, I own a 62, I know this is a 63/64 site but the…Continue
I'm trying to remove the rear seatback on my 1964 deville conv. The only help on this site that I can find is the following:
The seatback, its bright stainless trim, and the speaker grille are removed as an assembly. The seat back hangs on two hooks near the top, and is retained to the body by two bolts and washers near the floor, one on the right side, one on the left.Once these fasteners are removed, lift the seat back upward and free it from the hooks
Are the front and rear seat frames the same for 63/64 Coupes and Convertibles because Original parts group makes reproduction seat covers for 1963 only and and i prefer the 1963 seat pattern so with that being said does anyone have information regarding this thanks.