October 2015 Blog Posts (9)

Oil Cap Breather

Oil Cap Breather, what would have if you plugged the breather. Would it breathe thur the blow by?

Added by Dominic Salemi on October 25, 2015 at 5:41pm — 1 Comment

Need a GOOD Rim for my 1964 Cadillac

Does anyone have a good rim for my 1964 Cadillac?

Thank Dominic

Added by Dominic Salemi on October 25, 2015 at 5:21pm — 1 Comment

exhaust manifolds

guys do exhaust manifolds from a 1964 Fleetwood 429 fit on a 390 from a 63 ?

Added by tim sparks on October 22, 2015 at 11:06am — 2 Comments

Magic Circle

Does anyone know what this is, I took it off of my 63 Fleetwood. I looked online for a picture of it and to see what it was for. I won't be putting back on just curious…

Continue

Added by Robert Collier on October 12, 2015 at 4:24pm — 2 Comments

vacuum locks

What should the vacuum be at for the door locks and trunk?

I am, at idle, around 18-20 inHg, but it does not seem to be enough to raise or lower the door locks or release the trunk. So I vacuum tested the drivers door and it checked out (no leaks/ held vacuum), still would not raise or lower lock, should the other doors be checked or do I just not have enough vacuum?

Added by Robert Collier on October 12, 2015 at 3:30pm — 3 Comments

radiator support bars

Can someone send me a detailed pictures as to where the end of these rods go in front of the core support, I think I might be missing a piece, but either way I can't see where the bolt up on the bottom, I see the where the mount to the top.…

Continue

Added by Robert Collier on October 12, 2015 at 2:31pm — 2 Comments

Westgate car show and Good Guys Spring Nationals

A couple of pictures one of the photographers took two weeks ago at the Westgate car show and the bottom was at the Good Guys Spring Nationals 2015…

Continue

Added by Robert Collier on October 12, 2015 at 2:00am — 2 Comments

1964 cadillac fleetwood parts

guys have a64 Fleetwood that I'm parting out good motor and tranny lots of good parts if u need something let me know at sparkstim20@yahoo.com I'm in massachusetts

Added by tim sparks on October 8, 2015 at 10:43am — 1 Comment

64 tilt steering

guys just transplanted 64 tilt into a63 non tilt everything successful but having trouble with round horn button with wire inside wheel works then drive a little stops working any idea what the problem might be.thanks for any suggestions

Added by tim sparks on October 6, 2015 at 11:09am — 4 Comments

Monthly Archives

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

Photos

  • Add Photos
  • View All

Forum

Modern radio antenna …

Started by Mack in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

Just replaced radios for the modern radios with Bluetooth and all the dance things and wanted to share how I went around the antenna knob… I’ve installed a regular two way GM window switch in the…Continue

BOOT

Started by John Inglesby in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith on Tuesday. 1 Reply

I recently purchased a new boot for my 64 convertible and was wondering how difficult it s to install. I'm not very mechanical. It looks like the chrome piece behind and at top of seats needs to be…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje on Monday. 8 Replies

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 9 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service