On publication of his article in the SELF STARTER on the 1963-64 Cadillac Chapter of the Cadillac LaSalle Club. 

Well done. 

Regards,

Jeff Kinzler

Views: 69

Comment

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

Comment by Tony and Ginny 429 on May 16, 2018 at 10:17am
Love your response - surely said --in a deep vioce--0f coarse !!

Rock and roll Music is here to stay ---they tell me !!
Gotta feel a little bad for those who missed the early days of Rock and roll in the good old US of A
A very wonderful time to be alive for the younger generations in this time slot in the USA ( me )
I truly have lived thru the very best years that America has had to offer on so very many levels and feel blessed for that and by that


Enjoy

Enjoy
Comment by Jason Edge on May 15, 2018 at 8:23pm

Tony.. in my most southern accent....
I mean really southern....
even Tupelo Mississippi southern ...
   
THANKYAVERYMUCH!

Comment by Tony and Ginny 429 on May 15, 2018 at 6:35pm
So very much of the excellence that that goes on on this site --is the result of the attention to detail that is so much a part of who MR Jason Edge is
To me he is the very last world on the subject of these cars ( possibly in the world )
We are very fortunate to have this gentelman as our Commander and Chief
( no matter what his wonderful southern humble heritage may say in response )


Enjoy
Comment by Tony and Ginny 429 on May 15, 2018 at 9:51am
To all the members who make this the very great website what it is since i joined in 2006 ( the different sites that evolved to this place )
It does take -- A Village of cooperation --to get her done - to this degree of excellence
Looks like we got it right with hands on repair info ( Search library of years of stored info available here ) and the parts needed to keep you enjoying our wonderful cars with some reduced restoration frustration
Very hard to imagine --the difference restoring these cars would be without the computer technology we have available to us today
Making it possible to research and get the task done right -- at hand

I know i can repair almost anything i see done once

Enjoy




Why am i sure the info on this site has encouraged some individuals to restore a car that would not have not been considered without the info posted on the subject
Comment by Jason Edge on May 15, 2018 at 7:17am

Thanks, Ray. Because of members like yourself, it has been a pleasure being a part of this Chapter.  You jumped right in during the summer of 2010 and help us launch our Chapter, and of course your contribution can be seen all around the world now on the backs of those that wear our Chapter shirt and see the cool design you created. It seems like just yesterday we formed the Chapter, and here it is almost 8 years on and we are still growing and improving every day. I was going to make an announcement soon, but we are about to break through the 300 Chapter member mark, which I think is a significant achievement. For the many of you on the website that have not joined the CLC and our Chapter, I strongly encourage you to Join the Club.  As you  know, our website is open to anyone, however, joining the CLC and the Chapter will take you to the next level in terms of fun and fellowship as we enjoy these great cars!

Comment by Raymond Peter Bombeck Sr. on May 14, 2018 at 11:28pm

Awesome Job and very informative info on club and all it took to get it done and the payoff for all your hard work with the help of others to get this club where it is today. I wish I had it in me to participate more. My Hat off to you Jason for all that you have done and do as well as all the others. My 63 Fleetwood thanks you for helping her return to the road as well. I am a proud member and feel that I am truly blessed to be a part of it.

Thanks 

Comment by Jason Edge on May 11, 2018 at 10:06am

Thanks, Michael! It was a pleasure to write and thanks to all of you for being part of our Chapter & Website.

Comment by Michael Long on May 11, 2018 at 9:51am

I thoroughly enjoyed reading this article! I would honestly say it was the best feature of 2018 so far! I really enjoy our club newsletter but am partial to articles that pertain to what I love- 1950-1964 Cadillacs!

Great work Jason!

Comment by Jeff Kinzler on May 2, 2018 at 10:30pm

Thank you Jason!

Comment by Jason Edge on May 2, 2018 at 9:29pm

... and Congrats to Jeff for his Keep on Truckin' article in the same May issue! The 63/64 Chapter is definitely well represented in the Self-Starter this month!

Photos

  • Add Photos
  • View All

Forum

Upper and lower Control Arms Bushings

Started by Joe DiIaconi in General Discussion 38 minutes ago. 0 Replies

Was just thinking if You Jason and You Russ and anyone else have a surplus of Upper and lower Control Arms you might want to replace the bushings and then sell them as a whole unit. I don't know if…Continue

Fuel pump again!

Started by Chris in General Discussion 2 hours ago. 0 Replies

Hi guys, well my fuel pump decided to crap out tonight after a Sunday cruise with the family. I had to get the car towed home since it wouldn’t start.I’ve written on here before regarding issues I’ve…Continue

question on oil pump priming and pressurets

Started by Tim Bobeck in 1963/64 Cadillac Specific Discussion 6 hours ago. 0 Replies

hi everyone , I have a 63 coupe  that I have rebuilt the 390 engine. Long story short, after getting it all together and in the car, I started to prime to oil pump with a drill and socket, and I…Continue

My new project ( upper control arm bushing )

Started by Joe DiIaconi in 1963/64 Cadillac Specific Discussion. Last reply by Joe DiIaconi 7 hours ago. 3 Replies

Has anyone found a good kit to replace all of the bushings including ball joints,  tie rod inner and outer, upper and lower control arm bushings, center link. I replace mine a couple years ago, but…Continue

Blog Posts

where do I find a new and better motor?

Posted by john kilbourne on May 24, 2018 at 11:43am 11 Comments

My '64 convert is getting better, but the engine remains questionable. Starts and runs well enough, powerful, but I think I hear a main bearing banging, the balance is not great and I'd like to upgrade to fuel injection if I can.

Are there dependable remans available of good quality? Are new crate engines available? Will more advanced engines from newer years fit?

Also, please, the diff ratio is quite high, lots of RPMs compared to today's cars. Are there diffs with lower…

Continue

1963 Cadillac DeVille

Posted by Sven on May 21, 2018 at 8:00am 0 Comments

Good morning community, I have this beautiful 1963 4 door for sale, asking cad$9999, that's about us$7750. I would bring it down south over the border to North Dakota or Minnesota.

If anyone is interested, feel free to ask questions.

Otherwise what are the best websites to sell classic cars in the states?



Please view this ad:



63 cadillac deville ,…

Continue

camshaft

Posted by Dave Fundaburg on May 20, 2018 at 11:49am 1 Comment

Has anyone used the performance camshafts offered by Kanter or Isky if so how do you like the upgrade in general and how is the idle quality and vacuum for power accessories any advice would be greatly appreciated, thanks.

Door jamb switchs

Posted by Anthony Boles on May 17, 2018 at 9:50am 9 Comments

I'm having problems with the door jamb switches,the interior lights will sometimes work or the interior lights will just stay on and run the battery down ,there's three black wires spliced together and one simgle black and white wire,what could be the problem. 

Videos

  • Add Videos
  • View All

© 2018   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service