Engine Unit Number - Decoded and other Information


Number          Shop Manual Name    Description/Location(s)                              
44K2076        Engine Unit Number    Top Rear of Engine by Oil  Pressure sending unit, etched into block.


44K is the Engine Unit # prefix that identifies the engine type. For this example it means this engine was intended for a 6039,  6329, 6339, 6357, 6367, 6267 with air.

2076 denotes the numerical order in which this engine was built.

A decode card for Prefix codes is located on page 1-2 of the 1963 and 1964 shop manuals.    

Decode Info for 1963 390 Engines

Body Styles Engine Unit No. Prefix 

6039, 6229, 6257, 6267, 6239, 6329, 6339, 6357, 6367, 6389 without air cond

6039, 6229, 6257, 6267, 6239, 6329, 6339, 6357, 6367, 6389 with air cond 36K
6723, 6733, 6890 without air 37X
6723, 6733, 6890 with air 37K

Decode Info for 1964 429 Engines

Body Styles Engine Unit No. Prefix 

6039, 6329, 6339, 6357, 6367, 6267 without air

6039, 6329, 6339, 6357, 6367, 6267 with air cond. 44K
6229, 6257, 6239 without air 46X
6229, 6257, 6239 with air 46K
6723, 6733, 6890 without air 47X
6723, 6733, 6890 with air 47K



Views: 2221


You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website


  • Add Photos
  • View All


Caddy Shack parts & services

Started by Russ Austin in 1963/64 Cadillac Specific Discussion. Last reply by tom servas 2 hours ago. 12 Replies

At Caddy Shack, I have good used parts, stored in buildings and sheds.  I source my parts from cars here in Arizona, so I offer sheet metal and parts in generally rust damage free conditions.  The…Continue

Tags: shack, caddy

1964 Carter AFB

Started by Dave Bird in Wanted to Buy. Last reply by Dave Bird 2 hours ago. 9 Replies

Looking for a built or suitable for rebuild Carter carburetor for my 1964 Fleetwood 60 429 THM w/AC. It would be a plus if it had the solenoid for the THM transmission in working shape. The previous…Continue

Tags: Carter, AFB, 90, Fleetwood, 1964

trunk wheel wrench location

Started by maurice lapoiinte in General Discussion. Last reply by Tony and Ginny 429 4 hours ago. 2 Replies

Just finishing up my trunk restoration on my 63 convertible. the spare mounts to the floor on the right rear, the jack goes in the clips on the right side. the jack base and hook go in their holders…Continue

This months (March) Birthday Boys and Girls. For a bit of fun.

Started by Kevin Campbell in General Discussion. Last reply by Kevin Campbell 4 hours ago. 8 Replies

1st up is Dino, with his 55th birthday rocking in on the 19th. I reckon, Jason will play a Dean Martin classic for Dino for his birthday. Maybe, something like this, based on the love between Jason…Continue

Blog Posts

64 Recirc/Fresh Air Door Actuator replaced; FROM THE INSIDE.

Posted by Norman Silverman on February 4, 2019 at 11:21pm 8 Comments

I am happy to report that I have successfully replaced the Fresh Air/Recirc door actuator that is located on the blower box-and have done so without having to remove the blower box. I did it by taking out the glove box and attacking it from the back.  It took several days, LOTS of patience and some band-aids, but it is done. THE most difficult part -BY FAR- is to remove and then replace the screw that sits on the actuator arm, connecting it to the fresh…



Posted by Mike Petrey on January 13, 2019 at 12:25pm 7 Comments

Where do the flashers go in my 64 Deville Convert.  I'm thinking that's why both turn signals stopped working.

Source for Motor mounts and Trans mounts 1964 SDV

Posted by Norman Silverman on January 9, 2019 at 4:23pm 4 Comments


Where is the best place to purchase good quality motor mounts/trans mounts for my 1964 SDV? I see that Rock Auto has them for $8 and change, and others for $24 and change. Big difference. Is there a better place to buy them from?




  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service