Comments - Jason Coupe DeVille Resto: Interior Pieces Out for Some Upholstery Work and Painting - 63/64 Cadillac Website2024-03-28T16:22:57Zhttps://6364cadillac.ning.com/profiles/comment/feed?attachedTo=6543066%3ABlogPost%3A54811&xn_auth=noChad, I had new fabrics insta…tag:6364cadillac.ning.com,2017-02-20:6543066:Comment:1434952017-02-20T12:37:19.991ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>Chad, I had new fabrics installed in the seats and door and rear qtr panels by Auto Interiors in Raleigh NC around 1997 just after I bought the car. In 2013 I had them resew more new dover fabric in the drivers side on the bench seat and add a bit more padding in the seat. They sourced the original sandalwood dover fabric thru SMS .... the go to place for original leathers, vinyls and fabrics and other interior materials.<br></br>Auto Interiors also installed carpet on the bottom of door…</p>
<p>Chad, I had new fabrics installed in the seats and door and rear qtr panels by Auto Interiors in Raleigh NC around 1997 just after I bought the car. In 2013 I had them resew more new dover fabric in the drivers side on the bench seat and add a bit more padding in the seat. They sourced the original sandalwood dover fabric thru SMS .... the go to place for original leathers, vinyls and fabrics and other interior materials.<br/>Auto Interiors also installed carpet on the bottom of door panels, rear lower qtr panels, and bottom back of seat. I installed the floor carpet. I remember taking them a sample under the seat to match the medium sandalwood that was in the car. Of course it being a 64 de Ville it has the cut pile, so that matched that. I do not remember what company they sourced that through. My carpet is one of those areas I want to redo. The very front section does not have the correct bead seam and did not reach up far enough to secure with the wide washer finish screws like from the factory.</p> I remember being able to look…tag:6364cadillac.ning.com,2015-11-30:6543066:Comment:1144472015-11-30T23:24:27.733ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>I remember being able to look it up on the TCB Global website with just the interior trim code. In fact I found out they were the same color in an "Ah Ha" moment looking at the Paint Chip charts closely!</p>
<p>I remember being able to look it up on the TCB Global website with just the interior trim code. In fact I found out they were the same color in an "Ah Ha" moment looking at the Paint Chip charts closely!</p> I used TCP Global - http://ww…tag:6364cadillac.ning.com,2015-11-29:6543066:Comment:1143572015-11-29T16:19:50.684ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2175928983?profile=original" target="_self"></a>I used TCP Global - <a href="http://www.tcpglobal.com/" target="_blank">http://www.tcpglobal.com/</a>.</p>
<p>Since the interior light sandalwood is the same color as the exterior Bahama Sand (Trim Code 44), any auto body shop should be able to have the color mixed for you.</p>
<p>For a bit more detail, Interiors that have the Sandalwood interior called the color light sandalwood…</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2175928983?profile=original" target="_self"></a>I used TCP Global - <a href="http://www.tcpglobal.com/" target="_blank">http://www.tcpglobal.com/</a>.</p>
<p>Since the interior light sandalwood is the same color as the exterior Bahama Sand (Trim Code 44), any auto body shop should be able to have the color mixed for you.</p>
<p>For a bit more detail, Interiors that have the Sandalwood interior called the color light sandalwood (#95323) as you indicated, and is also listed as the Exterior Bahama Sand (Cadillac Code 44) color. IT is often used on interiors with Cadillacs with bahama sand, golds, and red exterior paint. See chart below:</p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2175928983?profile=original" target="_self"><img width="750" class="align-center" src="http://storage.ning.com/topology/rest/1.0/file/get/2175928983?profile=RESIZE_1024x1024"/></a></p>
<p></p> Mark, Are you talking about t…tag:6364cadillac.ning.com,2015-11-29:6543066:Comment:1145202015-11-29T14:35:22.296ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>Mark, Are you talking about the rear seat package shelf? I bought from <strong>Class Tech Parts -</strong> <a href="http://class-tech-cars.com/"><font color="#35944D">www.class-tech-cars.com</font></a> as listed on our Parts Supplier page, but do not see the package tray anymore. OPGI sells for sedans but not 2 door hard top coupes. I would google and check on eBay. USA Parts may also have them, as well as SMS Fabrics and Interiors.</p>
<p>Mark, Are you talking about the rear seat package shelf? I bought from <strong>Class Tech Parts -</strong> <a href="http://class-tech-cars.com/"><font color="#35944D">www.class-tech-cars.com</font></a> as listed on our Parts Supplier page, but do not see the package tray anymore. OPGI sells for sedans but not 2 door hard top coupes. I would google and check on eBay. USA Parts may also have them, as well as SMS Fabrics and Interiors.</p> They are rare. Of 43 parts ca…tag:6364cadillac.ning.com,2015-01-08:6543066:Comment:944712015-01-08T01:47:07.133ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>They are rare. Of 43 parts cars and 5 driver 1963's and 1964's maybe 5 or 6 had rear seat belts. Snake-Oyl and others can provide seat belts, but finding them with the original mounting hardware, belts, and crested buckles is hard. For any one looking for the original belts, I can add you to the Wait List. Just shoot me an email with fabric color preference. </p>
<p>They are rare. Of 43 parts cars and 5 driver 1963's and 1964's maybe 5 or 6 had rear seat belts. Snake-Oyl and others can provide seat belts, but finding them with the original mounting hardware, belts, and crested buckles is hard. For any one looking for the original belts, I can add you to the Wait List. Just shoot me an email with fabric color preference. </p> Bumping up for Alex are any o…tag:6364cadillac.ning.com,2014-03-22:6543066:Comment:701352014-03-22T00:03:12.176ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>Bumping up for Alex are any one else that might need to clean and grease the window motors, cam channels, and guides.</p>
<p>Bumping up for Alex are any one else that might need to clean and grease the window motors, cam channels, and guides.</p> Well, door tracks and channel…tag:6364cadillac.ning.com,2013-11-15:6543066:Comment:564112013-11-15T15:36:45.935ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>Well, door tracks and channels are regreased and alignment adjusted and door panels are installed and will stick a fork in this project and call it done! Well I still have to adjust the left side ash tray a bit and paint the kick panel rear finish trim but the big items are done! Now to get everything cleaned up and ready for the Carolina Collector Auto Fest tomorrow. CALL IT CUTTING IT CLOSE!!</p>
<p>Here are a couple of pictures with my door panels and refurbished arm rests…</p>
<p>Well, door tracks and channels are regreased and alignment adjusted and door panels are installed and will stick a fork in this project and call it done! Well I still have to adjust the left side ash tray a bit and paint the kick panel rear finish trim but the big items are done! Now to get everything cleaned up and ready for the Carolina Collector Auto Fest tomorrow. CALL IT CUTTING IT CLOSE!!</p>
<p>Here are a couple of pictures with my door panels and refurbished arm rests installed:</p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6825/next?context=album&albumId=6543066%3AAlbum%3A54878"><img width="737" height="544" alt="IMG_6825" src="http://storage.ning.com/topology/rest/1.0/file/get/2155967578?profile=RESIZE_1024x1024"/></a></p>
<p> </p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6828/next?context=album&albumId=6543066%3AAlbum%3A54878"><img width="737" height="491" class="photo-loaded" alt="IMG_6828" src="http://storage.ning.com/topology/rest/1.0/file/get/2155969121?profile=RESIZE_1024x1024"/></a></p> Bench seat is installed, but…tag:6364cadillac.ning.com,2013-11-14:6543066:Comment:564052013-11-14T21:48:06.705ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>Bench seat is installed, but first took the seat transmission apart and cleaned out the old grease and sprayed shafts with white lithium spray grease and liberally applied white lithium cup grease to the cavity. I also thoroughly cleaned the seat rails and actuator and sprayed a layer of the white lithium grease up in the track.</p>
<p>Below are a few pictures which have also been added to the photo album at:</p>
<p><strong>Carpet cleaned and ready for Bench Seat Installed. I actually…</strong></p>
<p>Bench seat is installed, but first took the seat transmission apart and cleaned out the old grease and sprayed shafts with white lithium spray grease and liberally applied white lithium cup grease to the cavity. I also thoroughly cleaned the seat rails and actuator and sprayed a layer of the white lithium grease up in the track.</p>
<p>Below are a few pictures which have also been added to the photo album at:</p>
<p><strong>Carpet cleaned and ready for Bench Seat Installed. I actually cleaned the carpet yesterday while on a lunch break from work. I've been pinching every minute trying to have car ready for Saturday!</strong></p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6768/next?context=user"><img width="737" height="491" class="photo-loaded" alt="IMG_6768" src="http://storage.ning.com/topology/rest/1.0/file/get/2155970305?profile=RESIZE_1024x1024"/></a></p>
<p> </p>
<p><strong>Bench Seat installed and tested. Transmission works great!</strong></p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6822/next?context=user"><img width="645" height="600" class="photo-loaded" alt="IMG_6822" src="http://storage.ning.com/topology/rest/1.0/file/get/2155969432?profile=RESIZE_1024x1024"/></a></p>
<p> </p>
<p>The 6 way power seat transmission was disassembled, cleaned and new lithium grease added. The casing comes apart via Phillips screws. Be sure to note the way the everything comes apart. <br/><br/>The cavity and solenoid shafts should be completely cleaned. The grease dries very heard preventing the solenoid slide plates from popping out engage the seat cable gears. I use 0000 steel wool and WD 40 to clean shafts and cavity. Make sure the slide plates on the shafts are slid completely off the "squared" section and all dried grease is removed. I had to really bear down to get the old brown dried grease out of the cavity. Here it is nice and clean:</p>
<p> </p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6776/next?context=user"><img width="498" height="600" class="photo-loaded" alt="IMG_6776" src="http://storage.ning.com/topology/rest/1.0/file/get/2064240879?profile=RESIZE_1024x1024"/></a></p>
<p> <strong>Ready to put back together:</strong></p>
<p> <strong><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6779/next?context=user"><img width="737" height="560" class="photo-loaded" alt="IMG_6779" src="http://storage.ning.com/topology/rest/1.0/file/get/2064240897?profile=RESIZE_1024x1024"/></a></strong></p>
<p> </p>
<p><strong>Installed under the seat with cleaned seat rails and actuators.</strong></p>
<p> </p>
<p><strong><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6794/next?context=user"><img width="737" height="491" class="photo-loaded" alt="IMG_6794" src="http://storage.ning.com/topology/rest/1.0/file/get/2155968858?profile=RESIZE_1024x1024"/></a></strong></p>
<p> </p>
<p><strong>New Carpet installed on the seats bottom back. They also added new padding and added a couple of missing buttons:</strong></p>
<p> </p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6791/next?context=user"><img width="737" height="466" class="photo-loaded" alt="IMG_6791" src="http://storage.ning.com/topology/rest/1.0/file/get/2155965497?profile=RESIZE_1024x1024"/></a></p>
<p> </p>
<p><strong>Picture of the painted/dyed sandalwood cap. I was very pleased how close the got the color to the tilt and turn signal lever caps...and gave me a half can of the paint for future touchups.</strong></p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6772/next?context=user"><img width="737" height="491" class="photo-loaded" alt="IMG_6772" src="http://storage.ning.com/topology/rest/1.0/file/get/2155968949?profile=RESIZE_1024x1024"/></a></p> Thanks Gerald. I've got the…tag:6364cadillac.ning.com,2013-11-13:6543066:Comment:563752013-11-13T23:28:38.108ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>Thanks Gerald. I've got the bench seat home, rails cleaned, transmission removed, cleaned greased, and bench seat sitting up in the car but not bolted down. Also have turn signal and gear shift lever installed. They were able to dye the gear shift lever cap with a color they had on hand that was very close to the dark sandalwood I was after. They even gave me the rest of the spray can as they said they had this color (already forgot what they called it) from another project. More…</p>
<p>Thanks Gerald. I've got the bench seat home, rails cleaned, transmission removed, cleaned greased, and bench seat sitting up in the car but not bolted down. Also have turn signal and gear shift lever installed. They were able to dye the gear shift lever cap with a color they had on hand that was very close to the dark sandalwood I was after. They even gave me the rest of the spray can as they said they had this color (already forgot what they called it) from another project. More later!</p> Well I was back at work today…tag:6364cadillac.ning.com,2013-11-13:6543066:Comment:561792013-11-13T02:24:24.490ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>Well I was back at work today so my time was limited in the afternoon and evening but got all wiring under dash off column reconnected, and installed the dash box door, and lower instrument panel cover below column. I also readjusted the column by moving the front large hanger bracket to align it perfectly with the round top ridge of the over the column piece. It had never lined up perfectly and probably spent upwards of an hour on getting it right. Only thing missing on the dash now are…</p>
<p>Well I was back at work today so my time was limited in the afternoon and evening but got all wiring under dash off column reconnected, and installed the dash box door, and lower instrument panel cover below column. I also readjusted the column by moving the front large hanger bracket to align it perfectly with the round top ridge of the over the column piece. It had never lined up perfectly and probably spent upwards of an hour on getting it right. Only thing missing on the dash now are the gear shift lever and turn signal lever which I'll install tomorrow evening after work.</p>
<p>Here are a few pictures with dash panels installed:</p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6758/next?context=album&albumId=6543066%3AAlbum%3A54878"><img width="737" height="491" alt="IMG_6758" src="http://storage.ning.com/topology/rest/1.0/file/get/2155969095?profile=RESIZE_1024x1024"/></a></p>
<p> </p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6759/next?context=album&albumId=6543066%3AAlbum%3A54878"><img width="737" height="491" class="photo-loaded" alt="IMG_6759" src="http://storage.ning.com/topology/rest/1.0/file/get/2155968435?profile=RESIZE_1024x1024"/></a></p>
<p> </p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6761/next?context=album&albumId=6543066%3AAlbum%3A54878"><img width="737" height="491" class="photo-loaded" alt="IMG_6761" src="http://storage.ning.com/topology/rest/1.0/file/get/2155965852?profile=RESIZE_1024x1024"/></a></p>
<p> </p>
<p><a class="next_photo_link" href="http://6364cadillac.ning.com/photo/img-6765/next?context=album&albumId=6543066%3AAlbum%3A54878"><img width="737" height="450" class="photo-loaded" alt="IMG_6765" src="http://storage.ning.com/topology/rest/1.0/file/get/2155969995?profile=RESIZE_1024x1024"/></a></p>