Comments - AC compressor ground wiring - 63/64 Cadillac Website2024-03-29T01:44:22Zhttps://6364cadillac.ning.com/profiles/comment/feed?attachedTo=6543066%3ABlogPost%3A65874&xn_auth=noJason, thank you for the phot…tag:6364cadillac.ning.com,2014-02-22:6543066:Comment:665912014-02-22T19:19:46.525ZChristian Doerkhttps://6364cadillac.ning.com/profile/Fleetwood60S
<p>Jason, thank you for the photo. I think this solution is the best.<br></br>But in the shop manual page 13-44, Note 37a. (Compressor Removal and Installation) #6 the text is: 'Disconnect clutch coil wires and remove screw securing ground wire to compressor'<br></br>So it should be correct on the compressor.</p>
<p>As I found out, with some more investigation, one car does have the ground on the compressor, another on the right thermostat housing, another again does have a longer wire, which connected…</p>
<p>Jason, thank you for the photo. I think this solution is the best.<br/>But in the shop manual page 13-44, Note 37a. (Compressor Removal and Installation) #6 the text is: 'Disconnect clutch coil wires and remove screw securing ground wire to compressor'<br/>So it should be correct on the compressor.</p>
<p>As I found out, with some more investigation, one car does have the ground on the compressor, another on the right thermostat housing, another again does have a longer wire, which connected to a bolt on the engine block etc.</p>
<p>@ Dan: rubber mounts on the rear of the compressor?! I don't have rubber mounts there. Is it possible to take a picture?</p> Compressor switch feeds the c…tag:6364cadillac.ning.com,2014-02-22:6543066:Comment:666362014-02-22T14:24:04.989ZJason Edgehttps://6364cadillac.ning.com/profile/jasonedge
<p>Compressor switch feeds the compressor via black wire (page 13-26 in 1964 shop manual). Black/White wire on same connector ground to right side thermostat housing bolt from factory.</p>
<p> Here is a lo res picture.. I'll try to find a better pictures:…</p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2175915069?profile=original" target="_self"><img class="align-center" src="http://storage.ning.com/topology/rest/1.0/file/get/2175915069?profile=original" width="450"></img></a></p>
<p>Compressor switch feeds the compressor via black wire (page 13-26 in 1964 shop manual). Black/White wire on same connector ground to right side thermostat housing bolt from factory.</p>
<p> Here is a lo res picture.. I'll try to find a better pictures:</p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2175915069?profile=original" target="_self"><img width="450" class="align-center" src="http://storage.ning.com/topology/rest/1.0/file/get/2175915069?profile=original"/></a></p>
<p></p> no one can post a photo, with…tag:6364cadillac.ning.com,2014-02-21:6543066:Comment:666082014-02-21T19:47:59.157ZChristian Doerkhttps://6364cadillac.ning.com/profile/Fleetwood60S
<p>no one can post a photo, with a correct installed wiring? ;)</p>
<p>no one can post a photo, with a correct installed wiring? ;)</p>