Good morning to all my fellow 63/64 Caddy friends,I have a problem with my convertible top operation that has left me puzzled.When opening and closing it, the process has become painfully slow. When…Continue
Very same model and exterior colors as my
My leather interior is the same color as the exterior
A wonderful combination especially when my top is down ( almost always in my case )
I see you have 65 rims and caps on the car
"Looks like Tony went into considerably more detail. Again, we have no rule where only one reply per question. In fact, it is better to get feedback from everyone than stay quiet if someone answers something. We all have different…"
"Sounds like the electrical motor part of the hydraulic pump is the problem overheating
You can lube the hydraulic cylinders Arms ---on both sides of the back seat with brake fluid per the manual to see if that allows them to move more freely ( less…"
Good morning to all my fellow 63/64 Caddy friends,I have a problem with my convertible top operation that has left me puzzled.When opening and closing it, the process has become painfully slow. When raising (closing) the roof, it actually stops in the middle of the process and only works after I leave the switch alone for a minutes or two.I thought it might the oil in the pump and followed the Manual to purge and fill it with transmission oil. There was none missing, but followed the steps in…See More
"Welcome to the 63/64 Cadillac Website.
This site is hosted by the CLC (Cadillac LaSalle Club) 1963/64 Cadillac Chapter. Joining the website is free to everyone, however, you must be a CLC member to join the chapter. - Click…"
Sep 18, 2017
Marc Robic is now a member of 63/64 Cadillac Website
plz watch this videoIt shows play between the 2 cylinders that make up my columni have tightened everything up as best as I can....but it moves a bitthe lower cover had a screw that lined it up, and…Continue
My newly acquired '64 Coupe DeVille suffers from a cracked right side exhaust manifold.It looks like my options are limited to rolling the dice on a used manifold, converting to headers or seeing if…Continue
I have found a very good replacement part for the Upper A Arm Bumpers. The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were. The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer. Part number is on the box in the photos. First photo is the box next to the box is the S10 part and an original. Next photo shows my sanded down part next to an original.…