I have a 64 and the timing is to far advanced the vacuum advance hits the valve cover I think this is a result of my father in law having a timing chain put on years ago what is the best remedy ?…Continue
"The PCV was spliced into that hose and tucked under the manifold the hose going under seems OK I just caped the port on the carb to get it to the right Idle when the new PCV comes I should be able to cut that hose back a little and make…"
"Steve, you are correct. The PCV hose connects to a breather tube under the intake manifold, towards the rear of the engine. To access, you will probably have to remove the intake. You may want to replace the hose at this point since you are…"
"OK I found it was a cracked hose going to the PCV valve and a bad PCV plugged the port on the carb now my question is where does the PCV go it appears to be a hose that disappears under the intake . also can some one point me to…"
"Steve, these cars can be frustrating for sure! For now, you can disconnect the throttle linkage entirely in order to idle the engine, set the timing, adjust the carb etc. It sounds like someone may have switched the linkage on you or it…"
"OK I am back at it this thing is just Idling to fast I got totally fed up with it last time now I have to do something with it but if it runs for 10 mins it is to hot to restart It starts and runs fine It is…"
There seems to be growing interest in the poly bushings. In order for me to keep track of who wants bushings, please send me a message along with or in lieu of a reply to either this thread or the…Continue
I need a used convertible boot for a 63 Cadillac convertible - condition or color is not an issue since it will be used as a pattern for making a new one. One from either a 62 series convertible or an Eldorado would work. I know I am searching for hen's teeth here... but you never know unless you ask!
Want to find a good straight dent free rear side trim for my 1963 Convertible. I have both sides but they do not match. Wanting to get them to match. I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it. Let's see what you have,…