Ignition Advance - Engine, Vacuum and Centrifugal Distributor Advance

As an addendum to the excellent John Washburn article on Ignition Advance and Vacuum Advance, I compiled Ignition Advance information for the 1963 & 1964 Cadillacs specifically and included in our March 2014 1963/64 Cadillac Chapter Newsletter. I have saved that "Tech Tip" as a separate standalone PDF document which you can see by clicking on
 
Ignition Advance

I have also copied it in here:

We have periodically discussed ignition timing and vacuum advance and the idea that vacuum advance at high engine vacuum (low rpm and cruising), and the mechanical centrifugal advance (at higher RPM and wide open throttle) all play into setting the engines "total advance".

Understanding the basics of max vacuum and centrifugal advance, total advance, manifold vs ported vacuum, and how it all works to make your engine run smoothly and efficiently is a complex topic, but have to say that John Washburn's 2 parts look at this subject in the January and February 2014 Issues of the Self Starter provides an excellent summary.

In Part 1 in the January 2014 Self Starter, he covers vacuum advance includes the part # for the 1956 to 1963, and 1965 to 1966 Vacuum Advance (part # 111 6168 in groups 2.410) but skips over the 1964 one year only vacuum advance (part # 111 6237).

In Part 2 in the February 2014 Self Starter he covers all 3 elements of engine advance including engine timing, vacuum advance and centrifugal/mechanical advance and how they affect performance. Both Part 1 and Part 2 include charts and stats and illustrations up through 1962 which is applicable to our cars since the 1963 distributor and advance where used for previous years.

A quick look at the Shop manuals reveals the difference in vacuum advances from 63 to 64:

For 1963 the shop manual indicates:
Vacuum Advance: Start 8" - 10", Full 13.25" - 15.25", Max Vacuum advance 11.25 degrees
Centrifugal Advance: Start 0 to 1.5 degree advance at 400 rpm, Max 7 to 9 degrees at 2000rpm
Timing advance 5 Degrees BTDC

For 1964 the shop manual indicates:
Vacuum Advance: Start 5 - 7", Full 20", Max Vacuum Advance 10.75 degrees.
Centrifugal Advance: Start 0 to 1 degree advance at 400 rpm, Max 8 to 10 degrees at 2000rpm
Timing advance 5 Degrees BTDC

In 1965, Cadillac went back to the same distributor and vacuum advance used in 1963.

In summary:

--> FIRST: The vacuum advance at high vacuum conditions (low rpm and cruising speeds) provides a LOT of advance. That's 10.75 to 11.25 degrees advance if you have sufficient manifold vacuum, and your vacuum advance is in good working order. If in doubt have your distributor checked on a Sun Distributor machine using the specs on the previous page and replace and rebuild if needed.

--> SECOND: The 1964 requires a full 20" of vacuum to hit its max advance, so if you drive at a high altitude (as referenced in Mr. Washburn’s article) or have other issues causing low engine vacuum and do not reach the 20" of vacuum, you will never reach the max vacuum advance. The article references adjustment using alternate parts to compensate for the lack of obtaining maximum advance at high altitudes.

--> THIRD: You can compensate for defective vacuum advance by physically changing the engine timing setting; however, you will be adversely affecting performance somewhere else as you alter the total engine vacuum. Mr. Washburn references the fact that at cruising speeds your engine is running lean and does not need a lot of horsepower.

--> FOURTH AND FINALLY: Read the excellent article by John Washburn on vacuum advance in the January and February 2014 Self Starter

--> Also. Check out a good description of ported vs manifold vacuum for those running aftermarket carbs, by a GM tech by Clicking Here.

Views: 2560

Comment

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

Comment by Jason Edge on August 11, 2023 at 10:24am

I remember the discussion on engine, vacuum, and centrifugal advance coming up recently and thought I would bump this one up. As noted in the article there is a downloadable PDF version at  Ignition Advance 

Comment by Jason Edge on June 21, 2018 at 5:34pm

That's fantastic regarding the local and original vacuum advance find. Glad the info was useful! 

Comment by Jason Edge on April 5, 2016 at 3:36pm

Click on the Help page link and scroll down to Pertronix.

Photos

  • Add Photos
  • View All

Forum

Modern radio antenna …

Started by Mack in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

Just replaced radios for the modern radios with Bluetooth and all the dance things and wanted to share how I went around the antenna knob… I’ve installed a regular two way GM window switch in the…Continue

BOOT

Started by John Inglesby in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith on Tuesday. 1 Reply

I recently purchased a new boot for my 64 convertible and was wondering how difficult it s to install. I'm not very mechanical. It looks like the chrome piece behind and at top of seats needs to be…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje on Monday. 8 Replies

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 9 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service