I only saw one blog for LED lights/ headlights, I am thinking of doing the laser projector logo and also replacing the conventional headlights and door bulbs with LED, has anyone replaced and using them? Pics please of what they look like on the car.
Tags:
Here is the link for the laser projector for the doors, I just ordered them, so I will put up some pics when I get them installed. They look pretty cool
http://www.ebay.com/itm/2-Laser-Projector-Logo-LED-Door-Welcome-Ste...
Here are what the projectors look like on the ground, I installed them under the door.
I converted my headlights to a LED 5/34 projector assembly. I love the result. quite a bit of cutting needs to be done--headlights rings, and mounting brackets. i bought a spare set just in case.
using H3 conversions wasnt an option for me because they spray light all over as the lenses were not designed for the way LED produces light. you NEED projectors to A) get the most out of your light focused LUX (not lumen) and B) not blind oncoming drivers with your LUMENS.
Those lights look pretty cool, I only see the one set on the front, from the description they are high and low beams, so you could run all 4 like that?
Or how did you wire them up?
yes they are high and low, you could wire them up to run all 4 at the same time pretty easily. i wired the right hand side with factory wiring, and jumped to the other side. the LED's draw much less current than the sealed beams I had.
I used these, they are Chinese knockoffs and we will see how long they last...but for 50 bucks ea. they are a screaming deal they are a clone of the revered JW speaker lights. (which I may upgrade too if these fail soon)
https://www.amazon.com/gp/product/B01DZU30S0/ref=oh_aui_detailpage_...
How did you mount them? After reading your post I ordered a set for my 64 DeVille and the headlight isn't believed on the back and doesn't fit into the besel.
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard 13 minutes ago. 17 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Started by Doug Scarrow in For Sale 6 hours ago. 0 Replies 0 Likes
Just listed nice 1964 Cadillac steering wheel for tilt column https://www.ebay.com/itm/266781070358. $150 plus $25 USA shippingContinue
Started by Michael Vogler in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 19 hours ago. 6 Replies 0 Likes
My original '64 Devile radio has been rebuild and upgraded. Can't wait to get in back in the car!https://youtu.be/DgYqoV290KwContinue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 0 Replies 5 Likes
To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue
Tags: ebay
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by