My power steering has been squeaking and leaking, so it is probably time for a new pump. I've noticed that there are many different distributors, but can anybody recommend a particular seller from experience? Thanks,
Chris
Tags:
Try your local parts stores first. There is a new outer reservoir out there, and it is being put on the pumps and being sold as stock. I picked up one, and politely put it back on the pats counter and asked them to order another one and verify that it was indeed the correct type.
Thanks Russ. These are the kind of issues I don't want to run into.
Main issue I am aware of is trying to get an old pulley off and new one on without bending them. On most power steering pump pulleys you have a groove to evenly grip and pull the pulley off the shaft with a puller. No such groove on the 63/64 pulleys...either solid or vented pulleys... as they are smooth making the pullers useless. I think Russ punches them off with a impact hammer. I've relied on VG used ones and have a few on hand if anyone is in a pinch and needs a good used one.
I was looking through some previous posts and saw how mangled they can get. I don't particularly want to get stuck in a situation where the pulley gets bent and I can't drive the car back in the garage. Can you shoot me a price on a good used one, Jason?
The power steering pump needs to be refilled every drive, and I tried wiping the pump down to see where the leak was coming from, but it seems to be everywhere.
I've got the original cap, but was unaware that there was any dipstick. I saw the one you repainted. It turned out really nice. I would assume you degreased it, scuffed it up, taped off the top and hose ports and used a high temp spray paint. Any tips for painting this?
The dipsticks often break off and you can hear them rattling around in the pumps. It is a good idea to get them out of the pump, but not a big deal not having one as you can eyeball that you have fluid a couple inches from the top. I am sure on my pump I cleaned it, hit it with the impact brush, hand sanded what I couldn't get to, and repeat with some medium/fine sand paper, then once over it with 0000 steel wool dipped in Acetone, then a quick rinse with Acetone to clean any remaining film off. You just don't want to submerge it in a heavy solvent like gas or acetone since you have seals inside.
Thanks for the info. I'll be sending you an email soon about purchasing that.
I have good caps with the dip stick intact for 20.00
Started by Russ Austin in For Sale 8 hours ago. 0 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 10 hours ago. 19 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Started by Michael Vogler in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard 17 hours ago. 7 Replies 0 Likes
My original '64 Devile radio has been rebuild and upgraded. Can't wait to get in back in the car!https://youtu.be/DgYqoV290KwContinue
Started by Doug Scarrow in For Sale 23 hours ago. 0 Replies 0 Likes
Just listed nice 1964 Cadillac steering wheel for tilt column https://www.ebay.com/itm/266781070358. $150 plus $25 USA shippingContinue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by