Although the radiator was not leaking, nor was the car running hot, I tool out the radiator today to have it boiled out and rodded out. Then I changed the oil and filter (filter is very easy to reach…

Although the radiator was not leaking, nor was the car running hot, I tool out the radiator today to have it boiled out and rodded out. Then I changed the oil and filter (filter is very easy to reach with the radiator out), then the thermostat got changed. 

I'll have the radiator back from the shop on Monday, and will reinstall it then. 

Still having fun!

Norm

Views: 202

Comment

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

Comment by Norman Silverman on December 10, 2018 at 3:07am

Never knew about that. Thanks.  I generally use Royal Purple or a good major brand, which I change yearly or at 2000 miles, whichever comes first. I don't drive them hard, never rev them when cold and always keep an eye on the oil level. Here in San Diego we don't get extreme temperatures either way, plus most of our driving is freeway (both factors are very easy on a car).  I've had over 100 old cars over the years and never had an oil-related problem-even when I lived in (dare I say it) Brooklyn, New York. However, I generally don't keep cars more than a few years so if long term problems develop I guess I would not see them. 

Comment by Norman Silverman on December 9, 2018 at 11:45pm

Instead of Zinc I had frequently used Royal Purple. This time I used a different oil, so I put a little ZDDP additive in. I don't really see a need because I've never had a problem-but it can't hurt. 

Comment by Norman Silverman on December 9, 2018 at 8:33pm

Forgot to mention: There's little to no zinc in modern oils and that substance was used to provide certain types of lubrication so I added a Zinc supplement to the oil so as to further lubricate the flat tappets.

Comment by Jason Edge on December 9, 2018 at 10:25am

Oil goes from the pickup screen in the oil pan, to the oil pump, then up the oil filter support bracket to oil filter then distributed throughout the engine. The  "brief moment" it takes to fill filter and push oil out is negligible and should never cause problems as there have been millions of vehicles that have never had oil prefilled in the filter, BUT... it does not hurt anything and should theoretically help reduce wear in the engine over the long haul. What is the amount of wear it saves in the long haul? would it be in the  milli, micro, nano, pico meter range... Dunno.  Point being it cannot harm anything (unless you manage to drop the filter and spill oil all over that new garage  floor), and can only serve to help reduce wear and you know we all like to give our nurtured 390's and 429's the best care available. I have occasionally prefilled, but generally do not, however, this has again served as a reminder that it does not hurt to prefill and can only help... even if it is to stave off .000001 picometer of wear from our baby's innards!

Comment by Norman Silverman on December 9, 2018 at 2:04am

Not really. I brought up oil change and you added perspective. No hijack.

Comment by Norman Silverman on December 8, 2018 at 9:44pm

Kevin. I think it is a very good idea, but I don't think I would have the steadiness of hand required to do this-so I don't. Also, I don't think it is a very big problem because my current 1966  Imperial (and all the other ones before it over 40 years) has a horizontally mounted filter, in which case it is impossible to fill before attaching. I've never had a problem caused by oil starvation.

Norm

Photos

  • Add Photos
  • View All

Forum

1964 Floor braces rot

Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox 10 hours ago. 2 Replies

Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue

Tags: support, brace, Floor

Nice 1963 to 1967 Cylinder Head Water Outlet Pipe Assembly - $150

Started by Jason Edge in For Sale 14 hours ago. 0 Replies

I just pulled a very good Cadillac Cylinder Head Water Outlet Pipe for cars with AC with the extended arm for compressor. That came off a running parts and is a nice piece. Included is a new 180…Continue

40A CB in fuse box

Started by Larry Rees in General Discussion yesterday. 0 Replies

Don’t know if this is common knowledge or easy to find but was able to order a 40A Circuit breaker to fit in the fuse box from Crimp Supply inc or on Amazon from the same company source. Just thought…Continue

Trivia #29 - What Movie Is this?

Started by Jason Edge in Trivia. Last reply by Jason Edge on Monday. 12 Replies

It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance.   The Trivia Question is: What Movie Is this?…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service