My '64 Deville had a leak from the steering gearbox input seal. I pulled the gearbox and swapped out the seal, a relatively painless process.
After refilling the fluid and cranking the wheel lock to lock (car in the air) several times I fired it up. The wheel immediately jerked all the way right and the steering would not move. I shut it down and it easily cranks lock to lock. I did this about 30 times and burped fluid several times. When I fired it up, it worked 3 or 4 times on the ground then locked up again.
I pulled the pump and disassembled it. I found white pieces of hardened plastic or rubber inside, probably pieces of an old o-ring? Other than that the pump looked great, I took the flow valve and other components apart and cleaned and reinstalled. Same issue.
I have raised the front of the car way up, gone lock to lock about 50 times and it does take or alternately burp fluid. As soon as I set it on the ground and start it it yanks the wheel and then you basically can't move it until the car is shut off.
It is so tightly bound that it will kill the engine from pump trying to work I guess. So do I have a pump issue or a gearbox issue?
Of course the local parts outlets have neither.
Help!
Tags:
You are probably right, thanks for the info. I did mark the threads on the spool valve nut and I thought I had it back to the correct location but probably not. I'll pull the box tomorrow and see what's up. So much for a Sunday drive!
Scott Santora Online
Started by Doug Scarrow in For Sale 10 hours ago. 0 Replies 0 Likes
just listed solid 1963 1964 non tilt steering wheel. https://www.ebay.com/itm/266784089004$120 plus shippingContinue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 20 hours ago. 9 Replies 0 Likes
I have a 64 Cadillac Deville convertible. When the wiper switch is turned on the washer pump activates continuosly no mater what speed is selected. Washer pump shuts off when wiper switch shut off.…Continue
Started by Russ Austin in For Sale. Last reply by Russ Austin 22 hours ago. 2 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 19 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by