Russ Austin's Discussions (141)

Discussions Replied To (125) Replies Latest Activity

"The new part is a Murray 74612 part number.  Found at Oriellys."

Russ Austin replied Feb 24, 2024 to AC HEATER CONTROL VALVE W/ SENSING UNIT

4 Feb 24, 2024
Reply by Jeff Donaldson

"You will not find anything new with the vacuum portion of it. The vacuum portion is…"

Russ Austin replied Feb 23, 2024 to AC HEATER CONTROL VALVE W/ SENSING UNIT

4 Feb 24, 2024
Reply by Jeff Donaldson

"I have a hood in Vail AZ  "

Russ Austin replied Feb 20, 2024 to Hood for 1964 Cadillac DeVille Convertible

1 Feb 20, 2024
Reply by Russ Austin

"Jose, tghere is no body mount kit that I am aware of. A competent body shop who does…"

Russ Austin replied Feb 15, 2024 to Body mount bushings

2 Feb 15, 2024
Reply by Jason Edge

"You can get the rear mount at CaddyDaddy.com It is a better mount than the stock one…"

Russ Austin replied Feb 3, 2024 to Transmission Mounts

2 Feb 3, 2024
Reply by Logan Robb

"I use the stock booster and it does leave a little bit of wanting for the pedal pres…"

Russ Austin replied Feb 2, 2024 to 63 Booster Fitment

2 Feb 3, 2024
Reply by Mike Travers

"What clips do you have? "

Russ Austin replied Feb 1, 2024 to body side molding clips

5 Feb 4, 2024
Reply by Wayne Morris

"No problems, just lack of activity on the board. "

Russ Austin replied Jan 29, 2024 to test test

2 Jan 29, 2024
Reply by Russ Austin

"Since it can take up to 4-5 months to get an engine rebuilt, it does seem like a goo…"

Russ Austin replied Jan 15, 2024 to Engine Rebuild

2 Jan 15, 2024
Reply by Russ Austin

"Thats where I get my clocks rebuilt, you will have no problems. "

Russ Austin replied Jan 10, 2024 to Clock Repair

5 Jan 10, 2024
Reply by Dennis P. DiBari

RSS

Photos

  • Add Photos
  • View All

Forum

alternator V belt

Started by Robert Alan Shannon in General Discussion. Last reply by Robert Alan Shannon 1 hour ago. 2 Replies

 Could anyone give me the Gates or Dayco number for the alternator V belt, just can't remember it and trying to get her back on the road after many years.  63 wA/CContinue

Tags: belt, V, alternartor

Heater Core Replacement

Started by Michael Monson in 1963/64 Cadillac Specific Discussion 12 hours ago. 0 Replies

I'm currently rounding up parts for a heater core replacement in my 1964 Deville.  I'm looking for replacement hoses that connect to the heater core itself.  It's a factory a/c car and has the metal…Continue

Trivia # 35 - All About the Windshields

Started by Jason Edge in Trivia 19 hours ago. 0 Replies

Keeping the trivia "glass related":- How Many Different Windshields Were Used On All 1963 & 1964 Cadillac Body Styles? - What were the two main differences or subgroups of windshields? Hint, one…Continue

Trivia #34 - What % of 1963 & 1964 Cadillacs Came with Tinted Glass

Started by Jason Edge in Trivia. Last reply by Jason Edge 19 hours ago. 6 Replies

What % of 1963 and 1964 Cadillacs came with the optional "soft ray" tented glass?  1963 & 1964 were very close, so if you get one you will get the other. Need to get it within 3%. So, who will…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Events

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service