Jason Edge's Discussions (2,054)

Discussions Replied To (1523) Replies Latest Activity

"I checked and have one right side that has some corrosion but solid enough to suppor…"

Jason Edge replied Feb 16 to Front fender splash guard bracket

7 Feb 17
Reply by Dennis P. DiBari

"Either is fine, they are on the same circuit. Just make sure you tap into the pink w…"

Jason Edge replied Feb 16 to Pertronix 3 install and resistor wire

18 Feb 28
Reply by Dave Fehrle

"Just replied. Still catching up from being on the road since Jan 21 for except for a…"

Jason Edge replied Feb 15 to front fender splash guard bracket

1 Feb 15
Reply by Jason Edge

"Is this the front lower bumper end splash apron bracket that is behind the splash ap…"

Jason Edge replied Feb 15 to Front fender splash guard bracket

7 Feb 17
Reply by Dennis P. DiBari

"Steele Rubber (www.steelerubber.com) sells the body mounts ... at least 3 sizes I se…"

Jason Edge replied Feb 15 to Body mount bushings

2 Feb 15
Reply by Jason Edge

"Hi Jeff, I have 3 customers on my Wait List for 63 Tail Lamp Escutcheons. Email me o…"

Jason Edge replied Feb 12 to Pulling in Parts Car #54

16 Feb 12
Reply by Jason Edge

"It was smooth sailing all the way home. Here is a picture with my trophy right after…"

Jason Edge replied Feb 10 to North Carolina to Illinois Roadtrip for Parts Car #59

4 Feb 10
Reply by Kurt

"As a reminder of my Modus Operandi regarding parts cars and parts, I will start brea…"

Jason Edge replied Feb 7 to North Carolina to Illinois Roadtrip for Parts Car #59

4 Feb 10
Reply by Kurt

"- The resistor wire needs to be replaced with a 12 volt source that gives a switched…"

Jason Edge replied Feb 4 to Pertronix 3 install and resistor wire

18 Feb 28
Reply by Dave Fehrle

"If not running wire to the pink "ignition wire" and instead running direct to fuse b…"

Jason Edge replied Feb 4 to Pertronix 3 install and resistor wire

18 Feb 28
Reply by Dave Fehrle

RSS

Photos

  • Add Photos
  • View All

Forum

Modern radio antenna …

Started by Mack in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

Just replaced radios for the modern radios with Bluetooth and all the dance things and wanted to share how I went around the antenna knob… I’ve installed a regular two way GM window switch in the…Continue

BOOT

Started by John Inglesby in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith on Tuesday. 1 Reply

I recently purchased a new boot for my 64 convertible and was wondering how difficult it s to install. I'm not very mechanical. It looks like the chrome piece behind and at top of seats needs to be…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje on Monday. 8 Replies

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 9 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Events

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service