Howdy everyone had a question maybie you guys can help me,I have a 1963 coupe deville and i got it with air bags problem is its way to bouncy in the front need to get a shock relocatio ok n kit but I cant seem to fund where to buy one can anyone direct me to the right place to buy I'm in northern california

Views: 375

Reply to This

Replies to This Discussion

Would increasing air pressure help ?

Had them fully pressured when I drove it around

Would changing to RideTech's Shock Wave system work? They have integrated shock absorber air bag units for all corners of your car. I believe you can buy components independently.

https://www.ridetech.com/products/air-suspension/shockwaves/

Yeah I checked them out very tempting but cost is alot I know adding shock would be all it needs I ordered me some universal shock relocators for like 40$ still gotta by the shocks,saw some great videos of guys who used them they look like they are gonna do their thing,if not I'll have to get the ride tech ones
I bought a universal upper shock mount kit, which is pretty much a L bracket that bolts to the frame, then drilled a hole in the lower suspension arm. I went through a few shocks until I found a Monroe shock that worked the best. It’s long enough to give the suspension enough travel to air completely and it will still compress to lay out. I’ll try to find the part #
Monroe 5839 OE Spectrum.. $129 for two on O’reilly online

I would love to see some pics. Did u lose some turning radius?

RSS

Photos

  • Add Photos
  • View All

Forum

1964 Cadillac Coupe Deville Wiring plan

Started by Kai Dröse in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 16 hours ago. 7 Replies

Hi from germany,i know here is a many content about wiring plans and so on.but i need the correct wiring plan for my new dream car ;) the passenger window does not work…Continue

64 Fleetwood Trans Issues

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Tuesday. 10 Replies

I've posted a few times about the strange issue I have with the trans on my 64 Fleetwood. When it gets warm and up to temp, I loose 3rd gear, but I never loose reverse. According to multiple sources,…Continue

New Holley, but which one?

Started by Henrik Sonne in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Tuesday. 14 Replies

First I will start by saying, I am a newbie. Recently purchased a ´56 HT, which has a 390" from a ´63 in it. I have decided to put a new Holley on it, but not 100% sure which one would be the best…Continue

Shock absorbers and bolts

Started by Sammy in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

Time again to change my shocks. No matter if Gabriel,  ACDelco whatever - don't last longer than 3 or 4 years.Problem is the rubber parts thats gliding out of the bottom.But now I have another…Continue

Blog Posts

WANTED HARMONIC BALANCER BOLT 1964 DEVILLE

Posted by ANGELO MARTINEZ on July 23, 2023 at 10:44pm 3 Comments

  Hope someone can help me to find the harmonic balancer bolt for my 1964 Cadilac Deville 429 engine

in advance, thank you for your help.

Clock ‘64 DeVille

Posted by Matt Vander Hooven on July 23, 2023 at 7:36pm 2 Comments

Is there still a member in the Detroit area that refurbishes clocks?

Matt VH

Spark Plug Heat Range

Posted by Patrick Westphal on July 7, 2023 at 10:00am 3 Comments

I found a diagram that illustrates the main factor in determining a spark plug heat range that I was trying to describe to you during the chapter get together.

Here it is:

 

The main factor is the length of the ceramic insulator from the middle of the spark plug to the tip (where the spark happens)  

The insulator…

Continue

Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 



I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…

Continue

Videos

  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service