I recently purchased a 1963 Coupe deVille. The transmission will only shift 1st to 3rd. I put the car on a lift and drained the pan and torus. I removed the shift valve body and coupling valve body, cleaned the pistons and bores, replaced the filter and fluid and adjusted the TV rod per spec. No change in the way it shifts. I have read that the aluminum cover on the fluid coupling is prone to cracking which will also cause the trouble I am having. I feel a rebuild is is in my future. Other than Gene's transmission in California, can anyone recommend a shop on the east coast? I live in Virginia Beach, VA. John. 

Views: 255

Reply to This

Replies to This Discussion

Hey John , go to the Cadillac / Lasalle  Club site and post your question . Im sure somebody can help you find a Trans guy by your area, Good Luck. Ray 

John, did you happen to find any other shops or what was wrong? My transmission is doing the same.

I called Gene and talked to him for an hour. He is near genius but just a little more than I wanted to pay.

Josh, I live in Virginia Beach Virginia and finally found a shop in my area to overhaul my transmission The shop is CarLife Transmissions in Norfolk Virginia. The owners name is Fred Kent and he is very knowledgeable. Before I could tell him what steps I had taken to correct the problem he told me exactly what was wrong. I had already researched the problem and knew that the secondary fluid coupling was leaking. The only way to correct it is to pull the tranny. I dropped off my car at the shop 2 weeks ago and and am expecting it back any day now. He quoted me $3980 (must be the going rate for a Jetaway) for the overhaul and had every part needed for the rebuild. That price included removal and installation. Yes, I know it is quite a bit but at least I know it will be done right.

Thanks for the info John. BTW, I love VA Beach...I was stationed at Langley AFB for 4 years. That's my old stomping ground!!

RSS

Photos

  • Add Photos
  • View All

Forum

1964 Floor braces rot

Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox 12 hours ago. 2 Replies

Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue

Tags: support, brace, Floor

Nice 1963 to 1967 Cylinder Head Water Outlet Pipe Assembly - $150

Started by Jason Edge in For Sale 16 hours ago. 0 Replies

I just pulled a very good Cadillac Cylinder Head Water Outlet Pipe for cars with AC with the extended arm for compressor. That came off a running parts and is a nice piece. Included is a new 180…Continue

40A CB in fuse box

Started by Larry Rees in General Discussion yesterday. 0 Replies

Don’t know if this is common knowledge or easy to find but was able to order a 40A Circuit breaker to fit in the fuse box from Crimp Supply inc or on Amazon from the same company source. Just thought…Continue

Trivia #29 - What Movie Is this?

Started by Jason Edge in Trivia. Last reply by Jason Edge on Monday. 12 Replies

It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance.   The Trivia Question is: What Movie Is this?…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service