1964 Cadillac 62 Series Coupe Driveshaft Measurement - Hydramatic

Would any of the members have the following information. 

I am looking for the measurement of the front driveshaft on a 1964 Cadillac 62 Series Coupe equipped with the Hydramatic transmission? I acquired a complete driveshaft from a 1964 Cadillac De Ville with a Turbo Hydramatic transmission (which is longer) and want to cut the front driveshaft to the length needed for the Hydramatic. The reason for this is I have the spare De Ville Turbo Hydramatic driveshaft assembly and want to get it rebuilt and the do the swap without having the car sidelined at a garage for a long period while a driveline shop rebuilds the driveshaft assembly. Also, is the splined trans yoke the same on the Hydramatic and the Turbo Hydramatic trans? Any help is appreciated. Thanks

Views: 91

Reply to This

Replies to This Discussion

Per my notes the shorter HydraMatic front driveshaft overall length is 36 1/8" long, compared to the 38 1/4" length of the Turbo Hydramatic. Splines on the front slip yoke are the same. I recently pulled an excellent complete HydraMatic driveshaft with a rear section where the CV joints had a lot of snap & spring which is a good sign of the overall health. I sold the rear section  (which are like unobtanium in this condition) but still have the excellent front section and even the center member. The front section is $100 (or $125 with the center member bearing assembly). Check out this link for more details: https://www.facebook.com/media/set/?set=a.517530393162282&type=3

Picking up an almost guaranteed really good front section for a Benjamin note would be easier that cutting and splicing... and you could turn around and sell that front THM section.

If interested email me at jasonedge@nc.rr.com 


Thanks for the quick reply. I will check the link out. 





  • Add Photos
  • View All


1964 A/C Delco Parts book for Deville

Started by Mark Bartlett in General Discussion. Last reply by Jason Edge 22 hours ago. 1 Reply

Is there a place to go to buy or look at original parts book ThanksssContinue

differential seal

Started by Al zink in 1963/64 Cadillac Specific Discussion. Last reply by Al zink yesterday. 2 Replies

Can anyone provide me with a good source for a differential seal for my 63 cadillacThanksContinue

1964 turbo trans

Started by JOHN V SCHILLACI in General Discussion. Last reply by Tony and Ginny 429 on Monday. 1 Reply

Hello, Does anyone know if the spacer between the engine and turbo trans year specific? If not what years fit which.Continue


Started by Mark Bartlett in 1963/64 Cadillac Specific Discussion. Last reply by Mark Bartlett on Sunday. 26 Replies

Hi I am new to this Discussion  I currently purchasing a 64 Deville convertible and It has bias ply tires that are 15 year old  they have L-78-15 tires and would like to put on radials . Question …Continue

Blog Posts

Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 

I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…


1964 power steering sector rebuild

Posted by CHRIS CARLSON on March 20, 2023 at 11:32pm 3 Comments

 I'm having my steering sector rebuilt, and considering changing it from 20-1 ratio 4.2 turns lock to lock to 3.5 turns lock to lock @ 16-1 ratio, If i change from a 3 1/4" box to a 3" box i could have a 14-1 Ratio steering response would be faster, shorter distance to turn the wheel to get a response,   has anyone done this? and how do you like it? thank you

1964 Daville dashboard clock

Posted by Willem Bol on March 13, 2023 at 11:33am 2 Comments


Can somebody help me finding a dashboard clock  for my 1964 Cadillac DeVille Convertible?

Thank you in advance,

Willem Bol

The Netherlands

Does anyone know where I can get the bushings for AC compressor mount on the 429?

Posted by Robert Schles on February 21, 2023 at 11:45am 2 Comments

I've looked at the usual rubber sources but couldn't find any. 


  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service