I am looking for a contact for clock repair. I want to get my clock to work again.Any suggestions? thank you!

Views: 39

Reply to This

Replies to This Discussion

Clock Works- http://www.clockwks.com/

They will refurbish as original or convert to quartz. I have had them do both and very pleased. My current clock was converted to quartz by them about 15 years ago and keeps perfect time.

Corvette Clocks by Roger is another vendor. Roger did the clock for my 64. I kept mine original.

This place repairs/converts clocks AND sells do-it-yourself kits. I bought a quartz conversion kit for my Trans Am and installed it 4 years ago. It was fairly easy to install and still works great. They even sell new original electromechanical movements as well. I had the clock in my Coupe DeVille quartz converted well before I discovered this place. It has been running for 15 years. If it ever dies I'll buy a DIY kit for it too.

https://www.clocksandgauges.com/home.html

RSS

Photos

  • Add Photos
  • View All

Forum

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 22 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Valve stem seals for 429?

Started by Matti Roth in Restoration Discussion. Last reply by Matti Roth yesterday. 7 Replies

Hello!I am rebuilding 429 for 64 DeVille and got Felpro head gasket kit including valve stem seals. Is it recommended to install those even though they are not originally used? O-rings will be…Continue

429 lower compression ring

Started by Matti Roth in Wanted to Buy. Last reply by Matti Roth on Friday. 3 Replies

I am installing new rings to my 64 429 and being first time there, I managed to break one ring. I wish not to buy the complete set. Are there single std size rings available? Continue

Blog Posts

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Thank you Kurt re: VIN location

Posted by Robert Pellow on April 19, 2021 at 1:07pm 0 Comments

I just wanted to say a thank you to Kurt for steering me to the tech tips page on V.I.N. locations.  Excellent information.  Thanks a bundle.

Robert Pellow

V.I.N. where?

Posted by Robert Pellow on April 18, 2021 at 1:41pm 6 Comments

Where can I find the V.I.N. on a 63 convertible?  The usual space at the base of the interior windshield on the driver's side has been decimated by weather.

63 Trunk detail

Posted by Bob Pontius on April 8, 2021 at 3:07pm 6 Comments

Jason, I liked the detail and information you have provided. I would like to do mine similar to yours. Can you help? Do you have trunk material? OPGI is sending the trunk product for my 63 Fleetwood. But it does cover the entire trunk as yours was done. If you do not have can you give me a reference? Thanks!! Bob

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service