• 64 dash cover with cruise cut out on the left hand side
  • 64 2 piece driver's side inner fender sandblasted and in primmer black
  • 63 64 door handles with minor pitting
  • 63 64 upper painted cowl and grills
  • 64 rear gas door assembly with license plate chrome trim pieces
  • 64 DeVille driver's side front fender body side molding/belt line trim/spear
  • 64 DeVille passenger side front fender body side molding/belt line trim/spear
  • 64 trunk edge molding 3 piece set
  • 63 64 4 window Sedan DeVille lower windshield 2 piece trim set
  • 63 64 4 window Sedan DeVille back glass belt line 3 piece trim set
  • 64 4 window Sedan DeVille below back glass belt line trim/molding
  • 64 front lower center bumper
  • 64 front upper center bumper
  • 64 lower driver's bumper end/bucket


All parts are from a 1964 4 window sedan DeVille and are in nice driver condition.

A couple of trim pieces have minor repairable dings etc.

Happy to get you detailed pics and talk with you by phone.

I can ship to you from Vancouver, WA.

Please let me know if any inaccurate descriptions.

Views: 164

Reply to This

Replies to This Discussion

Hi Jim, Just to help you get the correct parts in the hands of need those that need them, you might consider specifying the specific model year and/or body styles where they are different.
For example:

- the 63 and 64 trunk edge trim is very different between the two years, It sounds like you have a set for each year?

- the 63 64 lower windshield trim (lower reveal trim) has 4 different styles (coupe, convertible, sedan, limo/CC)... all quite different.

- the back glass trim set is different between the 4 window sedans, 6 window sedans, 60 Special, and Coupes.

- The rear qtr belt and rear belt is considerably different between the 62 series cars and DeVilles with this trim. (62 Series has a 2 plane contour, DeVilles with a center raised satin area)

- Even things like inner fender are best spelled out, since the core inner fender is the same all body styles the filler pans and rear bracket are different between the 62/63/60 Series and the 75/CC series.

Do u have fender trim available

Hi James, I might have fender trim left over from my 1963 series 62 project. I'll take a look if that will fit your need.

Hey Mark I need a 64 fender trim the 63 is different 

RSS

Photos

  • Add Photos
  • View All

Forum

Back to Starter

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kim K Kaiser 1 hour ago. 36 Replies

Ok,  short refresher,  last dec i relpaced starter w rebuilt from usa parts.  and even then,  after short runs where i got up to temp, if i shutvcar off, and then tried to start, it would drag…Continue

Been busy

Started by Clovis in General Discussion. Last reply by Jason Edge 3 hours ago. 3 Replies

I haven't spent much time on my old cars this summer. My latest project has been a gazebo on the new island. I'll be ready Wednesday to start putting on shingles. Tomorrow its facia and some more…Continue

Here's some what a update on the engine!

Started by Haris dizdarevic in General Discussion. Last reply by Jason Edge 13 hours ago. 7 Replies

Continue

Blog Posts

HVAC Vacuum Valve Clip-need the one for the Power Control side

Posted by Norman Silverman on September 17, 2018 at 8:15pm 4 Comments

Hi.

Update:

I removed both 7 nipple vacuum valves and called my buddy who owns a machine shop. Tomorrow we'll re-surface the valve faces and then I'll reinstall them. HOWEVER, the one that comes out easily and comes apart with no rivet is on the Power module side. It installs on one side with a small bolt, and on the other it is held on by a clip, WHICH IS MISSING ON MY CAR. I am going to assume it is the same clip that is used on the Control Module side. Anybody got one? Happy…

Continue

7 vacuum valve-need a good one or someone to recondition mine

Posted by Norman Silverman on September 15, 2018 at 5:44pm 12 Comments

So, I've put my 7 vacuum valve from the control head side to the test, and it failed. I looked at the instructions for re-conditioning it and unless I am missing something, the instructions are missing something (about how to take off the clip that provides the tension that holds the two pieces together). 

In any case, I can't do this particular repair so I am looking for a new valve (not likely), or a good re-conditioned one, or someone who has done this before and would do mine for…

Continue

Mosiac Cadillac emblem Table

Posted by Dana G Cooper on August 30, 2018 at 10:48pm 11 Comments

Wanted to share a picture of a table my wife made for me to display with our 63 Coupe Deville. 

Inside door handle thread size

Posted by Michael Jarnagin on August 23, 2018 at 4:31pm 1 Comment

Anyone know the thread size on the inside door handle bolts mine are missing any info much appreciated 

Videos

  • Add Videos
  • View All

© 2018   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service