Hello all. I'm a new member here and doing a build on a 63 Sedan DeVille for my cousin.

I'm looking for a driveshaft - Anyone have a good one they would be willing to part with and ship to me?

Thanks, Jamey (Houston, TX)

Views: 128

Reply to This

Replies to This Discussion

I have plenty of Very Good front sections ($75 + s/h) but am out of the rear section which are in very high demand due to fact rear CV joints wear out and few shops can correctly rebuild them. If you need a good front section, or wish to be added to the wait list for a nice rear section email me at jasonedge@nc.rr.com.

Jamey, welcome!

If you have the drive shaft from your car, give these folks a call, they can rebuild it for you or build a new one. I haven't used them but have talked to them about building a new one for my car. They're in San Antonio, TX.

http://www.driveshaftspecialist.com/

Dave, thanks for the source! Somehow the previous shops who had this car managed to 'lose' the driveshaft so I have nothing! Jason has me on the wait list for one and if nothing shows up in the next few months, I'll call these guys and have one made.

I have a good 63 driveshaft I will sell for $75 plus shipping, it has been rebuilt and balanced  at some time by a local shop. let me know. moefurd@telus.net

maurice

RSS

Photos

  • Add Photos
  • View All

Forum

Trumpet Horn

Started by Ray Schick in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 4 hours ago. 1 Reply

Check out the price for the trumpet horn on eBay , that’s crazy !   Someone really wants to blow their horn at that price.Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 17 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Front Disc Conversion for ‘64 Series 62 Coupe

Started by Dan Loukota in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 17 hours ago. 6 Replies

I started a front disc brake conversion on my ‘64 Caddy. I finished the drivers side first only to find my factory rim scrapes the caliper to the point it would need spacing 1” to clear and roll…Continue

Bucket seats

Started by Gregory Lewis Freeman in 1963/64 Cadillac Specific Discussion. Last reply by Ian Osborne yesterday. 15 Replies

I'm looking fo a set of 63 64 eldo or devilleBuckets with console and door seat controllersGreg 2133059550.Continue

Blog Posts

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 7 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service