I have had another bout of what I perceive as vapor lock.. its been warm again out here in MT, and I took the car for a several hour ride. Ran flawlessly,,, until I got back to town,  some slow driving, some longer idles, and I was at about 195 on the gauge.   to access were I live requires a pretty long, steep hill and I started up and half way up, it stalled and wouldnt start.  I back rolled it down the hill, tried to start and the bowl was empty, and not filling as I tried to restart.  and the fuel pump was VERY HOT.  just my thought is its getting vapored in or around the fuel pump and no gas is gettin to the filter bowl, add in the steep hill and it just stalls.  After about 2 hours of sitting, I went back and it fired right up, bowl was back to full.. pump was cool to touch.. 

so I got the thinking about going to a electric pump to try and alleviate this.   I noted Russ A. seems to think they have worked well from him as well as others.

so, my question is to options.  Can you add a lower pressure pump, say 3 to 5 psi and use it as a supplement to the mechanical pump, so as to continue to push fuel if it vapors, or would it be more prudent to just go with simply full electric and set it at the 7 psi that is required?  

Also, what brand has been found to be most reliable,  I see edlbrocks at the store, they have a lower pressure one  30 mph and and another one that goes up to 38 mph, I but im not up on these things so was just wondering..

any insight would be helpful

Views: 113

Reply to This

Replies to This Discussion

I use FACET fuel pumps which are high quality. You can run them with the original FP if its in good shape. A return line to the tank is a great idea. Insulate the fuel lines in the engine bay as well.

JWW

I have the line from pump to filter wrapped in insulated reflector tape. I tried to put it on the pump, but all the odd surfaced and oily surfaces didnt stick well.  I should also mention, its an ac car.  .  I will look into the pump you mention.

RSS

Photos

  • Add Photos
  • View All

Forum

Cadmium Plated Cadillac Bolts - More Used that You Can Shake a Dip Stick At!

Started by Jason Edge in General Discussion 15 hours ago. 0 Replies

I have now had just under 3,500 lb of Cadillac fasteners gold cadmium plated, one thing I don't run out of or have to run down to the hardware store are nuts and bolts.  I just replaced my 20+ year…Continue

Radiator Re-core PLEASE HELP

Started by Scott Santora in General Discussion. Last reply by Dennis P. DiBari yesterday. 4 Replies

I could use some confirmation. I sent out my radiator for my 63 De Ville to get re-cored. Several weeks later, when I went to pick it up from the service vendor, I noticed a large amount of green…Continue

Trivia #29 - What Movie Is this?

Started by Jason Edge in Trivia. Last reply by Cees de Bunje on Thursday. 13 Replies

It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance.   The Trivia Question is: What Movie Is this?…Continue

1964 Floor braces rot

Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox on Wednesday. 2 Replies

Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue

Tags: support, brace, Floor

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service