In looking through the carb forums, they all seem to be a bit stale. Has anyone tried the newer AVS2 1906 carb and have some feedback?

Views: 79

Reply to This

Replies to This Discussion

Call Edelbrock  techs direct and they will explain anything you need to know 

Enjoy

Hi Jeff

im running the AVS2 1905 Manuel choke on my 390 works great just make sure you use the the adaptor plate 

when I first fitted the carby ( new straight out the box) I couldn’t get it run smoothly due to flooding it was doing my head in as I followed the instructions. I ended up taking the top off the carby and found a foreign gasket inside the fuel bowl (see attached pic)which was causing it to flood I wasn’t impressed Edelbrock was sent an email about the problem (I got no answer from them) after I removed it worked like a charm.have fun with it 

regards Phil

Phillip

First I have heard of someone using this carb on one of our year Cadillacs 

Can you tell me the advantage of using this carb over the 1406 electric choke which is the  stock Carter replacement I most often see used for a Carter replacement from Edelbrock 

The Manual choke could be best possible choke set up but my electric choke has worked out  very well 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

KleerView/OptiKleen Bottle Location

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb 6 hours ago. 3 Replies

I just received a repop KleerView bottle and label for my 64 Fleetwood this morning. Wondering where the best location for this bottle would be? Or rather, where was it most commonly installed?I…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 20 hours ago. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

1964 A/C Delco Parts book for Deville

Started by Mark Bartlett in General Discussion. Last reply by Jason Edge yesterday. 1 Reply

Is there a place to go to buy or look at original parts book ThanksssContinue

differential seal

Started by Al zink in 1963/64 Cadillac Specific Discussion. Last reply by Al zink on Monday. 2 Replies

Can anyone provide me with a good source for a differential seal for my 63 cadillacThanksContinue

Blog Posts

Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 



I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…

Continue

1964 power steering sector rebuild

Posted by CHRIS CARLSON on March 20, 2023 at 11:32pm 3 Comments

 I'm having my steering sector rebuilt, and considering changing it from 20-1 ratio 4.2 turns lock to lock to 3.5 turns lock to lock @ 16-1 ratio, If i change from a 3 1/4" box to a 3" box i could have a 14-1 Ratio steering response would be faster, shorter distance to turn the wheel to get a response,   has anyone done this? and how do you like it? thank you

1964 Daville dashboard clock

Posted by Willem Bol on March 13, 2023 at 11:33am 2 Comments

Hallo,

Can somebody help me finding a dashboard clock  for my 1964 Cadillac DeVille Convertible?

Thank you in advance,

Willem Bol

The Netherlands

Does anyone know where I can get the bushings for AC compressor mount on the 429?

Posted by Robert Schles on February 21, 2023 at 11:45am 2 Comments

I've looked at the usual rubber sources but couldn't find any. 

Videos

  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service