well the dash pad i had was completely shot so i stripped off the rest of the vinyl and attempted to rewrap it. this is just a temporary fix as i am still on the hunt for an original one without any cracks. let me know your thoughts. i still have to cut out the ac vents on the back side. im letting the contact cement completely cure before i cut it and fold it

Views: 149

Reply to This

Replies to This Discussion

Looks ok in the photo.

Gotta be heaps better than a cracked one.

I'm do upholstery and I have to say, bravo. Looks good! The spikes that go down the dash are a pain no matter how good you are. If you don't have a heat gun, get one, it'll help. 

Looks very nice! 1000% better than a badly cracked dash pad!

RSS

Photos

  • Add Photos
  • View All

Forum

Rear trailing arm bushings- premature failure

Started by Doug Scarrow in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 2 hours ago. 97 Replies

    Last fall I replaced my rear yoke and trailing arm bushings . Now with 410 miles on them the large  rear trailing arm bushings are done . I contacted Rare Parts the maker and they were defensive…Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 14 hours ago. 171 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 14 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

'63 convertible visor mount questions

Started by Karl Schwarz in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 15 hours ago. 5 Replies

I've got a 1963 Series 62 convertible.Anyone know the size of the three screws used to mount the Striker Support to the trim above the windshield? The "Striker Support" appears to be the name of the…Continue

Blog Posts

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 7 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service