I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at www.facebook.com/classiccadillacparts and will post a few here  on this thread from time to time.

For items you are interested in send email me to jasonedge@nc.rr.com   

To save us both time be sure and provided details including year, body style, color, location (left or right, front or rear, etc), and any other information I need to identify the part. 

ps... be sure and "Like" my page!


Views: 40306

Reply to This

Replies to This Discussion

1963-1964 convertible door window glass in excellent condition for $50. This is the glass only, no trim or lower channel. It has the soft-ray tint. I have one other convertible door glass also in excellent condition. Email me at jasonedge@nc.rr.com

(CURRENTLY SOLD OUT) New 1962 to 1972 Cadillac Vacuum Advance - $35

I have new AC Delco 1964 Cadillac Vacuum Advances on hand that are correct for the 1964 Cadillac for $35 + s/h. The advance rod fully extends at 20" of mercury per shop manual specs and I recently replaced my busted vac advance on my 1964 CDV with one of these and it works perfect! If your vacuum advance is busted and need one email me at jasonedge@nc.rr.com with shipping address. 

Hot Water Return Pipe - $45. Cleaned, bead blasted, primed and painted Cadillac Blue. Email me at jasonedge@nc.rr.com This pipe is located under raised intake, and goes from heater core outlet hose at firewall/cowl to water pump inlet hose.

Original 1964 Cadillac Owners Manual - $25 + s/h. I just pulled in a good 64 owners manual. It is not mint but not bad either with no torn or marked up pages with only slight staining in a few places. Email me at jasonedge@nc.rr.com

Rear Wheel Brake Backing Plates - Restored - $50 each  <-- Click for More Pictures 

I have 2 sets of restored rear wheel brake backing plates that fit 1961 to 1965 Cadillacs except Commercial Chassis, all 1966, and 1967 to 1968 except Eldorado. They have been cleaned, primed and painted and ready to install. Price is $50 each. Email me at jasonedge@nc.rr.com

Various Ground Straps - $10 each <--CLICK FOR MORE PICTURES

Good ground straps are essential for your cars electrical systems, and complements the under hood appearance of your car. I have a large supply of nice, cleaned ground straps like the frame to engine, and engine to firewall straps you see in these pictures. I also have the correct attaching hardware. Price is $10 + s/h. If you need something email me at jasonedge@nc.rr.com

1959-1965 75 Series Parts   <-- CLICK FOR MORE PICTURES

I parted 4 1964 Fleetwood 75 series way back and still have a LOT of parts. Most of these will fit the 1959 to 1965 75 Series Body Styles. I had customers that wanted to see ALL of my 75 series parts so I pulled most but not all out, so it was a good time to take some pictures. Much of it is boxed up and in storage bins, but you should be able to get an idea of the volume of pieces I have! If you need something give me a shout at jasonedge@nc.rr.com

VG+ 1963 RH cornering light fixture and Grill

I was going through my 63 cornering lights and grills and noticed I have a very good, working right hand cornering light fixture, and outer grill. Brightness of these are greatly affected by how much decay and corrosion you have on the inside shiny material and whether or not you are using the correct 50cp bulb. This one has nice shiny inside with correct 50 cp light bulb and tested. The price is $50. The chrome grill is very nice and with only minimal pitting. The price is $25. The picture is of me testing the light a couple days ago. I do not have the RH lens, but I believe you can get the lenses new from OPGI or USA Parts. (I do have a very good LH 1963 cornering light lens). If interested email me at jasonedge@nc.rr.com with shipping address.

VG+ 63-64 Cadillac Tilt Column Actuator Housing - $65 <-- Click for More Pictures

The demand is really starting to increase for the 1963/64 Cadillac tilt column Actuator Housing in nice condition with good bell crank lever. I currently have 3 or 4 nice ones but see that supply running out at some point These get chewed up and broken over the years and according to the Master Parts Book only fits these 2 years. If you want one at a reasonable price email me at jasonedge@nc.rr.com with your shipping address.

NEW 63/64 Rear Belt Trim Fasteners Complete with Bonded Washers and Nylon Lock Nuts

I have new fasteners that work perfect to attach the rear belt molding found on the 63/64 Coupes. They include the studded clip, bonded washer, and nylon lock nut and sell for $3 each or $24 for the set of 8 needed for the coupes (I think the 4 window sedans would require the same #). If interested email me at jasonedge@nc.rr.com.
Just as a side note: I came about these fasteners as I was trying to nail down the best size fasteners for the side trim. These were a bit bigger... in fact too big... for the side trim but perfect for the rea belt trim for my 64 Coupe de Ville. Note the difference between the side trim (on left below) and rear belt trim (on right below) fasteners:

63/64 Cadillac Door Release Handle Covers - $35  <-- Click for more pictures.

These are the best of the best used interior door handle covers I have on hand and probably some of the best you will find without rechroming. These go at the front of the arm rest on the 1963/64 de Villes, Fleetwood and Eldorado, and 1963 Series 62 convertible (which actually has the deVille interior styling). Price is $20 each or $35 for the pair. Email me at jasonedge@nc.rr.com.

Nice Bead Blasted 1963/64 Hydramatic Inspection Cover Set - $60

I have a nice 1963 & 1964 Hydramatic Inspection Cover set, that has been bead blasted and ready to paint for $60 (or $40 large pan & $25 small pan + s/h. These are often missing or banged up really bad. These are very nice pieces! I can also prime and paint with the correct Cadillac Blue paint for an additional $35. Email me at jasonedge@nc.rr.com with shipping address.



  • Add Photos
  • View All


Chapter Member? Got a 63 or 64 Cadillac for Sale? Let's Run it in the Newsletter!

Started by Jason Edge in For Sale. Last reply by Jason Edge 6 hours ago. 4 Replies

One of the new features of recent newsletters is a Member Classified Cars for Sale section.…Continue

vacuum canister

Started by Walt Timmerman in General Discussion. Last reply by Rob Shatsnider 12 hours ago. 15 Replies

what is the vacuum canister for that is behind the drivers front fender?After removing my fender I see its got a hole in the top but nothing is hooked to it and no line is laying there.Any help would…Continue

New Batch of Embroidered Iron-On 1963/64 Cadillac Chapter Patches - $4 each

Started by Jason Edge in Chapter Discussion. Last reply by mark zimmerman 17 hours ago. 10 Replies

As noted in our August 1963/64 Cadillac Chapter Newsletter:Around 6 years…Continue

Tags: Available, Patches, Chapter, Cadillac, 1963/64

63 coupedebille fuel pump issues

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion. Last reply by Daniel Grande yesterday. 9 Replies

I have a 63 cadillac and I took it to a mechanic for a motor tune up long story short the fuel pump gave out and hes tried twice to order it and he says it didnt fit the original pump is smaller on…Continue

Blog Posts

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …


Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…


Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment


Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…


Thank you Kurt re: VIN location

Posted by Robert Pellow on April 19, 2021 at 1:07pm 0 Comments

I just wanted to say a thank you to Kurt for steering me to the tech tips page on V.I.N. locations.  Excellent information.  Thanks a bundle.

Robert Pellow


  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service