I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at www.facebook.com/classiccadillacparts and will post a few here  on this thread from time to time.

For items you are interested in send email me to jasonedge@nc.rr.com   

To save us both time be sure and provided details including year, body style, color, location (left or right, front or rear, etc), and any other information I need to identify the part. 

ps... be sure and "Like" my page!

Jason.

Views: 40306

Reply to This

Replies to This Discussion

I have a 2nd very nice bead blasted hydramatic inspection pan set bead blasted and ready to ship.  See picture below.  Price is still $60 for both, or or $40 for larger and and $25 for smaller pan. I also have the original 6 attachment bolts for $10. Email me at jasonedge@nc.rr.com if yours is banged up or missing!


Nice Original 63/64 Cadillac Wiper Arm, Blade Holder Set - $50. <-- Click for more pictures.

I have Very Nice Original Polished Stainless Wiper Arm, Blade Holder Sets for $50. These fit all body styles except the 75 Series Limos & Commercial Chassis. I also stock the correct new replacement rupper wiper blades. If you need the wiper blades the total is $60. Email me at jasonedge@nc.rr.com



Restored 1949-1966 Cadillac Valve Compartment Cover - $60

I have a Very nice valve compartment cover (Engine Top Cover) that has been cleaned and painted with Bill Hirsch Cadillac Blue for $60 ($50 for 63/64 Cadillac Chapter Members). This fits 1949 to 1966 Cadillac engines. Email me at jasonedge@nc.rr.com

Nice 63-64 Coupe de Ville Rear Belt Trim - $75

Just pulled a very nice 63-64 Cadillac Coupe de Ville rear belt trim. Fits Coupe de Villes only. Price is $75. I also have new studded fasteners available for $3 each. Also have the LH rear qtr belt trim but it is missing the attaching stud but nice other wise. Email me at jasonedge@nc.rr.com

Misc 63/64 Cadillac Power Trunk Parts  <-- Click for More Pictures
I just went through all of my 1963/64 Cadillac Power Trunk Release & Pull Down parts have posted pictures. If you need something email me at jasonedge@nc.rr.com


1964 6 Way Bench Seat Relay, Tested, Nice - $25  <-- Click for more pictures

Just pulled a Nice, Tested, 1964 6 Way Bench Seat Relay. Price is $25 + s/h. Email me at jasonedge@nc.rr.com


1964 6-Way Bench Seat Cable Set - $35 <-- Click for More Pictures
I have a very nice 1964 6 Way Bench Seat cable set for $35, or I sell the cables individually for $7.50. Email me at jasonedge@nc.rr.com

Excellent 1964 CDV Front Bench Seat Red Center Console - $75 <-- Click for More Pictures

Just pulled an excellent Front Bench Seat Center Console Assembly in red from a 1964 Coupe de Ville. Leather, and vinyl is very nice. I have cleaned up some, but will clean up more. A very nice piece! Price is $75. Email me at jasonedge@nc.rr.com

 

1964 CDV Rear Seat Center Armrest - $25 <-- Click for More Pictures

I just pulled a 1964 Coupe de Ville rear seat center arm rest assembly in Red. There is some cracking on the very front face, but the rest is in VG condition Price is $25 + /sh.

Nice 1963/64 Coupe Vent Window Reveal Molding Set - $35

I have a very nice set of the vent window lower reveal molding for the 1963/64 Coupes (both Coupe de Ville and Series 62 Coupe) for $20 each or $35 for the pair. These are different from the convertibles and sedans and can be hard to find. Email me at jasonedge@nc.rr.com


Excellent 64 Coupe de Ville Red Rear Qtr Interior - $225
I have an excellent complete 14 piece rear qtr interior set in red for a 1964 Cadillac Coupe de Ville.
It includes the lowers, uppers, spacer between upper and seat, and front edge windlace. The uppers also includes the 3 piece trim side for each side. These are very nice pieces with excellent leather, vinyl and carpet. I have cleaned up some, but will clean up more to like new condition. Email me at jasonedge@nc.rr.com

I just pulled very nice set of 63/64 Coupe Sun Visors in Red. Includes RH vanity mirror. visors are $30 each, Mirror is $25. Also have very nice Visor Mounts if needed. For details on visors and parts Click Here.

RSS

Photos

  • Add Photos
  • View All

Forum

Chapter Member? Got a 63 or 64 Cadillac for Sale? Let's Run it in the Newsletter!

Started by Jason Edge in For Sale. Last reply by Jason Edge 6 hours ago. 4 Replies

One of the new features of recent newsletters is a Member Classified Cars for Sale section.…Continue

vacuum canister

Started by Walt Timmerman in General Discussion. Last reply by Rob Shatsnider 11 hours ago. 15 Replies

what is the vacuum canister for that is behind the drivers front fender?After removing my fender I see its got a hole in the top but nothing is hooked to it and no line is laying there.Any help would…Continue

New Batch of Embroidered Iron-On 1963/64 Cadillac Chapter Patches - $4 each

Started by Jason Edge in Chapter Discussion. Last reply by mark zimmerman 16 hours ago. 10 Replies

As noted in our August 1963/64 Cadillac Chapter Newsletter:Around 6 years…Continue

Tags: Available, Patches, Chapter, Cadillac, 1963/64

63 coupedebille fuel pump issues

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion. Last reply by Daniel Grande yesterday. 9 Replies

I have a 63 cadillac and I took it to a mechanic for a motor tune up long story short the fuel pump gave out and hes tried twice to order it and he says it didnt fit the original pump is smaller on…Continue

Blog Posts

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Thank you Kurt re: VIN location

Posted by Robert Pellow on April 19, 2021 at 1:07pm 0 Comments

I just wanted to say a thank you to Kurt for steering me to the tech tips page on V.I.N. locations.  Excellent information.  Thanks a bundle.

Robert Pellow

Events

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service