I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at www.facebook.com/classiccadillacparts and will post a few here  on this thread from time to time.

For items you are interested in send email me to jasonedge@nc.rr.com   

To save us both time be sure and provided details including year, body style, color, location (left or right, front or rear, etc), and any other information I need to identify the part. 

ps... be sure and "Like" my page!

Jason.

Views: 41206

Reply to This

Replies to This Discussion



Restored 1949-1966 Cadillac Valve Compartment Cover - $60

I have a Very nice valve compartment cover (Engine Top Cover) that has been cleaned and painted with Bill Hirsch Cadillac Blue for $60 ($50 for 63/64 Cadillac Chapter Members). This fits 1949 to 1966 Cadillac engines. Email me at jasonedge@nc.rr.com

Nice 63-64 Coupe de Ville Rear Belt Trim - $75

Just pulled a very nice 63-64 Cadillac Coupe de Ville rear belt trim. Fits Coupe de Villes only. Price is $75. I also have new studded fasteners available for $3 each. Also have the LH rear qtr belt trim but it is missing the attaching stud but nice other wise. Email me at jasonedge@nc.rr.com

Misc 63/64 Cadillac Power Trunk Parts  <-- Click for More Pictures
I just went through all of my 1963/64 Cadillac Power Trunk Release & Pull Down parts have posted pictures. If you need something email me at jasonedge@nc.rr.com


1964 6 Way Bench Seat Relay, Tested, Nice - $25  <-- Click for more pictures

Just pulled a Nice, Tested, 1964 6 Way Bench Seat Relay. Price is $25 + s/h. Email me at jasonedge@nc.rr.com


1964 6-Way Bench Seat Cable Set - $35 <-- Click for More Pictures
I have a very nice 1964 6 Way Bench Seat cable set for $35, or I sell the cables individually for $7.50. Email me at jasonedge@nc.rr.com

Excellent 1964 CDV Front Bench Seat Red Center Console - $75 <-- Click for More Pictures

Just pulled an excellent Front Bench Seat Center Console Assembly in red from a 1964 Coupe de Ville. Leather, and vinyl is very nice. I have cleaned up some, but will clean up more. A very nice piece! Price is $75. Email me at jasonedge@nc.rr.com

 

1964 CDV Rear Seat Center Armrest - $25 <-- Click for More Pictures

I just pulled a 1964 Coupe de Ville rear seat center arm rest assembly in Red. There is some cracking on the very front face, but the rest is in VG condition Price is $25 + /sh.

Nice 1963/64 Coupe Vent Window Reveal Molding Set - $35

I have a very nice set of the vent window lower reveal molding for the 1963/64 Coupes (both Coupe de Ville and Series 62 Coupe) for $20 each or $35 for the pair. These are different from the convertibles and sedans and can be hard to find. Email me at jasonedge@nc.rr.com


Excellent 64 Coupe de Ville Red Rear Qtr Interior - $225
I have an excellent complete 14 piece rear qtr interior set in red for a 1964 Cadillac Coupe de Ville.
It includes the lowers, uppers, spacer between upper and seat, and front edge windlace. The uppers also includes the 3 piece trim side for each side. These are very nice pieces with excellent leather, vinyl and carpet. I have cleaned up some, but will clean up more to like new condition. Email me at jasonedge@nc.rr.com

I just pulled very nice set of 63/64 Coupe Sun Visors in Red. Includes RH vanity mirror. visors are $30 each, Mirror is $25. Also have very nice Visor Mounts if needed. For details on visors and parts Click Here.

I have a nice 1964 Cadillac Turbo Hydramatic Transmission inspection pan set that has been bead blasted, primed and painted with Bill Hirsch Cadillac Blue for $80 or $50 for larger pan and $40 for smaller pan pan. This includes the main lower inspection pan behind the adaptor ring, and the vertical flat inspection pan in front of the adaptor ring. Email me at jasonedge@nc.rr.com

Nice 1963 Fleetwood 60S Lower Door Trim Set - $125  <-- Click for More Pictures

Just pulled a very nice lower door trim set for the 1963 Fleetwood 60 Special. Selling for $125 for set or $35 each. Email me at jasonedge@nc.rr.com

RSS

Photos

  • Add Photos
  • View All

Forum

63 Hydra-Matic won't shift out of first

Started by Norm Waters in 1963/64 Cadillac Specific Discussion. Last reply by Norm Waters 2 hours ago. 7 Replies

Hello everyone. I had a perfectly good shifting Hydra-Matic transmission until I elected to fix the leak at the dip stick tube. I just did a quick seal with gasket maker since my current tube is…Continue

Rear brake lock up when cold

Started by Cliff Johnston in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 19 hours ago. 1 Reply

Hi everyone, ever since getting the car back on the road, the rear brakes grab when they are cold and I’m moving at slow speed.  Once I get along the road and stop they are fine. I see some posts…Continue

Vacuum advance

Started by Thomas Yarri in 1963/64 Cadillac Specific Discussion. Last reply by Thomas Yarri yesterday. 4 Replies

Good afternoon to all my fellow Cadillac owners! I have a question about the vacuum advance on my car. The car is a 64 without a/c and a Rochester carburetor. I noticed that I have vacuum at the port…Continue

Blog Posts

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Events

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service