Convertible bumper jack

[Alan Clark]

My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk.  Anyone have a picture of the item I should find?

[Jason Edge]

There should be clips in each end inside the opening as seen in my picture below. If yours are missing I have plenty along with the screws that attach them. 

[Logan Robb]

Jason, are the wooden blocks a factory component? Mine also came with the black wood block for the tire block. 

It is mega hot here this week. Perhaps repainting my bumper jack is something easy I can accomplish this week......

[Alan Clark]

I believe all Cadillacs of the 60s and 70s came with those black-painted triangular blocks of pine.  They did in my 67, 69, and 70 cars.  I plan to take the dimensions off those and prepare a block for this 1964 car which is missing the block.

[CHRIS CARLSON]

Did they come with one or two wedge blocks ?

[Alan Clark]

One block in each of my cars - except the 64.

[Jason Edge]

63's and 64's had one block.

[Logan Robb]

Thatd be great! I think I have mine kicking around here somewhere. Let me know what the dimensions of yours is. I think mine was split in two it was so dry. Id like to remake mine as well. 

[Alan Clark]

Measurements of the block in the trunk of my 69 Cadillac:

Picture a right triangle:

Base = 3 1/2"

Height = 5 3/4"

Hypotenuse = 6 5/8"

The block is 3 1/2" thick, so if looking down on the base, you'd see a 3.5" square.

The block in my 67 Cadillac also is made of pine painted black, but the dimensions are a fraction of an inch different.

[Logan Robb]

This is excellent! Thank you! 

I shall remake mine as well

[Alan Clark]

Thanks for the picture.  I will investigate.

[Alan Clark]

With the help of a friend holding a flashlight, I was able to secure the jack in the clips.  Noce and snug.  Thanks for your coaching.