Dash Pad
Hi, Just reaching out if anyone has any suggestions on where to find a dash pad for a 63' coupe? I just finished getting my interior redone and the dash is cracked and I'm having the hardest time locating a replacement. Thanks in advance for your suggestions!
Replies to This Discussion
-
Permalink Reply by Tony and Ginny 429 on
-
There are places that restore dash pads but I know from prior posts that it is expensive to be doing
Hope others who have had it done could drop a line
Enjoy
-
Permalink Reply by Russ Austin on
-
Just dashes in California does the dash pad restoration. Look to spend close to $1800.00 If you need a dash while yours is getting done, I have dashes with cracks that are good cores to send in or puy on your car, as it takes about 2-3 months to complete.
-
Permalink Reply by Kim K Kaiser on
-
I ran across some you tubes on restoring dashes, while it didnt look an easy project. it came out good of the guy doing it, it was a tutorial. cant remember where or who put it out there. BUT, for 1800,2000, id at least google it and see if you could find it, it may be within your skill range to do it. just a thought
Photos
Members
Forum
1964 Cadillac Coupe Deville Wiring plan
Started by Kai Dröse in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 10 hours ago. 7 Replies 0 Likes
Hi from germany,i know here is a many content about wiring plans and so on.but i need the correct wiring plan for my new dream car ;) the passenger window does not work…Continue
64 Fleetwood Trans Issues
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Tuesday. 10 Replies 0 Likes
I've posted a few times about the strange issue I have with the trans on my 64 Fleetwood. When it gets warm and up to temp, I loose 3rd gear, but I never loose reverse. According to multiple sources,…Continue
New Holley, but which one?
Started by Henrik Sonne in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Tuesday. 14 Replies 0 Likes
First I will start by saying, I am a newbie. Recently purchased a ´56 HT, which has a 390" from a ´63 in it. I have decided to put a new Holley on it, but not 100% sure which one would be the best…Continue
Shock absorbers and bolts
Started by Sammy in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies 0 Likes
Time again to change my shocks. No matter if Gabriel, ACDelco whatever - don't last longer than 3 or 4 years.Problem is the rubber parts thats gliding out of the bottom.But now I have another…Continue
Blog Posts
WANTED HARMONIC BALANCER BOLT 1964 DEVILLE
Posted by ANGELO MARTINEZ on July 23, 2023 at 10:44pm 3 Comments 0 Likes
Hope someone can help me to find the harmonic balancer bolt for my 1964 Cadilac Deville 429 engine
in advance, thank you for your help.
Clock ‘64 DeVille
Posted by Matt Vander Hooven on July 23, 2023 at 7:36pm 2 Comments 0 Likes
Is there still a member in the Detroit area that refurbishes clocks?
Matt VH
Spark Plug Heat Range
Posted by Patrick Westphal on July 7, 2023 at 10:00am 3 Comments 0 Likes
I found a diagram that illustrates the main factor in determining a spark plug heat range that I was trying to describe to you during the chapter get together.
Here it is:
The main factor is the length of the ceramic insulator from the middle of the spark plug to the tip (where the spark happens)
The insulator…
ContinueLower Front End Ball Joints
Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments 0 Likes
Good Morning all!
I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…
ContinueEvents
© 2023 Created by Jason Edge.
Powered by
