Views: 658

Reply to This

Replies to This Discussion

Just took a pic of my front brakes. 

Are you saying that there should be some washer ?

where? Between those two brackets that caliper is mounted to?

So washer between the caliper and the bracket that’s it’s mounted to, huh?

As far as I remember I had no washers in the kit... 

I’ll hve to call them again, damnit 

I've installed aftermarket disc brakes before and I needed to adjust (shim) the distance to the rotor. Your pads should be slightly touching the rotor when adjusted properly. 

When you bled the system and after the master cylinder rebuild are you 100% positive you got out all the air? The instructions for new master cylinder is to bench bleed it. It takes forever to get all the air out of a master cylinder. I've done several and they were all the same. 

What's up Tony? I hope your holding the fort for the rest of the crew. 

Yes, i did bench bled the MC and it did take me a while to get the air out of it.

i think I need to me adjusted/shimmed like you did because sometimes I feel and hear like the pad has too much room over there... we will see!

just called the company so they can verify the kit they sold me... life...

Hey Clovis 

Very nice to see you posting 

Your words of wisdom are very much needed here 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

New photo gallery

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 1 hour ago. 8 Replies

Having trouble posting my picture in the new gallery but managed to get the text right The computer WIZ - I am NOT ! Stay safe my friends Continue

New Car Gallery Page Created - Post a Picture of your 1963/64 Cadllac

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 2 hours ago. 4 Replies

Hello 63/64 Cadillac Website Members,Hope you are all staying safe amid the Coronavirus shutdown and wanted to share something new & fun on the 63/64 Cadllac Website at…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 3 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

1963 coupe deville front relocation shock kit

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion. Last reply by Jason A 11 hours ago. 6 Replies

Howdy everyone had a question maybie you guys can help me,I have a 1963 coupe deville and i got it with air bags problem is its way to bouncy in the front need to get a shock relocatio ok n kit but I…Continue

Blog Posts

How to sensibly deal with the Corona Virus

Posted by Jeff Kinzler on March 14, 2020 at 5:02pm 6 Comments

https://theamericanscholar.org/covid-19-a-primer/

I found this very helpful, written by a knowledgeable authority in public health. 

Remember, Viruses are not spread by Cadillacs so get out and drive!


Safe & Healthy travels. 

Jeff Kinzler

1963 Eldorado convertible boot

Posted by Les Eastling on February 27, 2020 at 10:33am 1 Comment

I need a used convertible boot for a 63 Cadillac convertible - condition or color is not an issue since it will be used as a pattern for making a new one. One from either a 62 series convertible or an Eldorado would work. I know I am searching for hen's teeth here... but you never know unless you ask!

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service