Has anyone ever used Dixie Exhaust Works for an exhaust system ? I e-mailed them and their answers were quick, definitive and reasonably priced. They advised me the exhaust would be ready to ship with 2-3 working days. Thanks in advance

Views: 111

Reply to This

Replies to This Discussion

Ray 

First I have heard of Dixie Exhaust Works on this site myself 

eBay has been a good source for some 

Our year Cadillacs have a very long flat stock muffler ( 2 - 2 1/2 feet long and thin ) and is necessary for correct ground clearance and noise reduction with our large cu in engines if you want your Cadillac to be quiet 

You will not find that muffler available  in exhaust shops these days 

The resonator at the back of the exhaust adds to that quiet quality but will be the first part of the exhaust to rust out early on 

Having owned a number of Cadillac years and realizing that I have not used the rear resonator on my 64 for over 35 years for that reason 

I have kept my steel exhaust system solid for over 35 years by running the car at least a half hour every time it is started 

That is the time all the  water moisture comes out of the engine and running it for that time burns off all the internal moisture in the  exhaust pipes 

Exhaust system rust from the inside out - not from the outside in 

Acquiring the correct muffler and having a shop or yourself do the installation  will get you to the correct stock exhaust system for our Cadillacs 

Exhaust work is something I choose to have done by a shop myself after a number of attempts over my lifetime 

The overall consensus on this site is that the  —-stock single exhaust is the better choice for our year Cadillacs 

Jason had dual exhaust and performance mufflers  on his CDV and went back to a single exhaust after a period of time 

If dual exhaust is your thing—- I suggest you exit the exhaust pipes just behind the rear tires ( never under the car ) as the location of the gas tank in our cars cause an issue with straight pipes out the back which is a look some like as do I 

The stainless steel option will make for a noisier exhaust as the pipes are a thinner material than the steel 

( thank you for that Russ ) 

That info should help you get your system right for your  own needs 

Enjoy 

I just sent Dixie an email to verify as to how long and thick the muffler they're providing will be. I'll forward that info

Tony, Dixie Muffler Works replied and advised me the stock measurement of an original is 3.5" x 8" and a 25" body length. The muffler he would send is 4"x9" with the stock length of 25". According to what he is providing I'll only lose 1/4" ground clearance provided the inlet and outlets are in the center of the muffler.

Ray 

  The Muffler Measurements sure sounds close enough to  stock to work as it should 

A picture might confirm where the muffler inlet and exit are located if needed 

This is the kind of muffler you want if you like your Cadillac stock and quiet which is my own choice 

There is always a bit of a rumble from theses older big cu in engines that I myself do enjoy over the much different sound of  the newer quiet engines they build today 

Big cu in engines in our Cadillacs are from a unique time in history  in America and the reason we gravitate to be restoring and driving these cars for the special driving experience they afford the owner 

I have been taking my car to the gym and half the gym is outside looking and hanging around the car 

My 64 convertible “ Has style and looks —-that stops people in their  tracks —and  that is hard to beat ! “

Enjoy 

10/4 ! I even experience that with my 4dr, 62 series

RSS

Photos

  • Add Photos
  • View All

Forum

Correct rims and drums?

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 5 hours ago. 5 Replies

As I am collecting items for a brake overhaul, I’ve have come across many posts about the aftermarket drums not being of quality like the originals. I am fairly certain the drums I have are not…Continue

cooling problem solved

Started by greg in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 8 hours ago. 6 Replies

I have a 64 Fleetwood and in the summertime with the a/c cranking when I would be in traffic or going slow it would always run warm....close to the 3/4 mark sometimes.   I replaced the fan clutch…Continue

Powder Coated Rims

Started by Logan Robb in 1963/64 Cadillac Specific Discussion 22 hours ago. 0 Replies

I have a very reputable blasting and powder coating shop near me, come this winter, I am thinking of getting my wheels power coated in preparation for new tires in the spring. Is this a good idea? I…Continue

Dragging to one side

Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Monday. 9 Replies

Hi there, after a lot of work on my brakes - new cylinder, hardware, shoes, hoses, going back to old drums, the car still drags to one side. Does this for years now, but I hoped to get rid of it…Continue

Blog Posts

WANTED HARMONIC BALANCER BOLT 1964 DEVILLE

Posted by ANGELO MARTINEZ on July 23, 2023 at 10:44pm 3 Comments

  Hope someone can help me to find the harmonic balancer bolt for my 1964 Cadilac Deville 429 engine

in advance, thank you for your help.

Clock ‘64 DeVille

Posted by Matt Vander Hooven on July 23, 2023 at 7:36pm 2 Comments

Is there still a member in the Detroit area that refurbishes clocks?

Matt VH

Spark Plug Heat Range

Posted by Patrick Westphal on July 7, 2023 at 10:00am 3 Comments

I found a diagram that illustrates the main factor in determining a spark plug heat range that I was trying to describe to you during the chapter get together.

Here it is:

 

The main factor is the length of the ceramic insulator from the middle of the spark plug to the tip (where the spark happens)  

The insulator…

Continue

Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 



I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…

Continue

Videos

  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service