Edelbrock 1406 Carburetor + Parts For Conversion For Sale

Gentlemen,

After 31 years I have sold my '63 convertible. Long story short is I got a price I believe was very respectable considering the market right now. That and I am moving on to finish my other project which I have owned even longer, 40 years, my Sunbeam Tiger. Bottom line is I don't have room to garage both of them and all of my other stuff and I wasn't making any progress on the Tiger. It is a rare car and a ton of fun so all of my efforts are going towards it now.

I have some extra Caddy parts left over and will attempt to sell them here. First up is an Edelbrock 1406 conversion I never got around to. I have the 1406 which I bought used off of Craigslist. It was described as having low run time and that looks to be the case. Beyond that, I know nothing so it is sold as-is. I have fabricated the TV rod plate discovered by Mike Daly in this thread - https://6364cadillac.ning.com/forum/topics/edelbrock-1406-carb?xg_r...

I also have the adaptor I purchased from Russ Austin that allows the original air cleaner housing to be used and a Trans-Dapt TRD-2446 recommended for this conversion that are included in the sale. This is the majority of what is needed for this swap.

Excellent summary here: https://6364cadillac.ning.com/forum/topics/edelbrock-1406-1411-inst...

$275 plus actual shipping cost. I'm just trying to get my money back.

More photos available if needed. PM or email me at ozzie90249@yahoo.com

Views: 346

Reply to This

Replies to This Discussion

$80 plus $8 Priority Mail shipping for all 3. The spacer and air cleaner adaptor were just test fitted so are essentially new.

I will offer them in order of response so Shelby Guy gets first dibs.

No response from Shelby Guy so MIKE, you're up now.

Thank you Ian but I just fabricated one. Have a safe new years.

$80 including Priority Mail shipping. Anyone?

All parts have been sold.

RSS

Photos

  • Add Photos
  • View All

Forum

63 coupedebille fuel pump issues

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 16 hours ago. 20 Replies

I have a 63 cadillac and I took it to a mechanic for a motor tune up long story short the fuel pump gave out and hes tried twice to order it and he says it didnt fit the original pump is smaller on…Continue

A Before & After Example

Started by Jason Edge in Restoration Discussion yesterday. 0 Replies

Since I started cadmium plating the many fasteners and other items from the 55 and counting parts cars I have bought in (1200 lbs worth and counting), I have to say it has really taken the…Continue

Oil leaking out of oil cap breather

Started by mark zimmerman in Restoration Discussion. Last reply by mark zimmerman yesterday. 12 Replies

Hi i would like some ideas on this i replaced oil cap breather and pcv valve and still oil  coming out of breather at normal speeds down the road.This has been going on for quiet awhile from the…Continue

Update on fuel pump

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion. Last reply by William R Conte on Tuesday. 1 Reply

I'm still looking thru land and sea for this fuel pump anyone out there know what size engine I have here are some pics of the stamps on the block I found to make sure my engine is a 390 because the…Continue

Blog Posts

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service