As i hv become a gauge watcher.  I thoight i would hok up a tachomeyer and the little lights on the three gauge unit so i can see at night.

So, i put the green wire to the neg, red to power source, and blck ground.  It worked, so nxt went to those tiny gauge lights,  i put a alligater clip on the instrument fuse for temp test, and grounded, didnt work. So i turned on the car, and the gen light came on and stayed on.  Wtf!    So i unhooked everything i had fooled with.   Started, same result. Gen light on.

Got meter, tested w car on,  14.24 to 14.4 on meter. 

12.7 to 12.8. car off, 12.6 to 12 8 w car on w brights on.

So i cked VR ground, it was tight.  [Its only about year or so old]  I cked alt,  oddly enough, the ground wire wasnot attached, i guess the nut vibrated off because i hvnt touched it since rebuild.  So i reattched, statrred car. Same result, gen light on. 

I then realized that when i turn the key, before ignition, the gen light usually comes on but now, it doesnt until it starts, almost in reverse of usual operation.

Any idea what i hv done to cause this and how to ck and rectify?

Views: 103

Reply to This

Replies to This Discussion

Hmmm,   glad to know there are those who understand power.   Thanks Mark.

Continuiing this a little,  where should i hook the power wire to the little gauge bulbs?  

Ok,  well, i had to google what a fusible link was, so its basically a lower resistance wire you attach inbetween the fuse box and the accessory you arecadding, so that if it overheats the wire. The link will burn before the overheating of the wire gets to the fuse box, is that correct?

Because its a nighttime option, would i be lookkngbfor dash lights or headlight wires to attach to.  

Thanks Tony.  Im try8ng to find the wires now.   

They look like regular bulbs.  I dnt care about dimming. Just want them on for night driving.

I did change fuse and all is bk to normal.  Gen turns on when key is switched over, then fades out when engine starts.  Glad it was only a fuse

RSS

Photos

  • Add Photos
  • View All

Forum

Radiator Re-core PLEASE HELP

Started by Scott Santora in General Discussion. Last reply by Dennis P. DiBari 15 hours ago. 4 Replies

I could use some confirmation. I sent out my radiator for my 63 De Ville to get re-cored. Several weeks later, when I went to pick it up from the service vendor, I noticed a large amount of green…Continue

Trivia #29 - What Movie Is this?

Started by Jason Edge in Trivia. Last reply by Cees de Bunje yesterday. 13 Replies

It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance.   The Trivia Question is: What Movie Is this?…Continue

1964 Floor braces rot

Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox yesterday. 2 Replies

Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue

Tags: support, brace, Floor

Nice 1963 to 1967 Cylinder Head Water Outlet Pipe Assembly - $150

Started by Jason Edge in For Sale on Wednesday. 0 Replies

I just pulled a very good Cadillac Cylinder Head Water Outlet Pipe for cars with AC with the extended arm for compressor. That came off a running parts and is a nice piece. Included is a new 180…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service