I am moving to a new home and haven't any room for two 64's, so i'm looking to get rid of them. They are both basket cases IMO, one is a 62 coupe and the other is an Eldorado.  I have the title for the eldo, but not the coupe.  rebuilt engine in the eldo donated by the coupe, and all the eldorado only parts are in my possession except the horn.  both are some what disassembled but mostly complete.  If no one wants them i'll strip off the good bits and send them to the crusher. 
They are located in NJ, just east of Phila.  if anyone is interested, lmk.  I know i didn't post pics but i can get them.

Views: 87

Reply to This

Replies to This Discussion

I might be interested in the Series 62 Coupe if it is still available around early to mid May and the price is right.  Right now I am still parting out #58 and into crunch mode on exterior of house addition.  I would have to be able to roll up with a car hauler, pull a rolling car up on the the deck and drive away (i.e. needs an undercarriage and some wheels).

the coupe will definitely be soup cans by May, so i'm not interested.  
the price for both cars together is 4500, with the rebuilt motor included.  If i get no offers, i'll crush the coupe and use the parts to throw the eldo together quickly.  


Sorry to hear you need to be getting rid of your two 64’s due to life changes 

Do hope you will pop in hear as you are a very valuable part of the good advice this web site is known for 

You are a very valued member of our year Cadillac web site —- so stop in as often as you can to help keep us on the right track 




  • Add Photos
  • View All


1964 Cadillac Coupe Deville Wiring plan

Started by Kai Dröse in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 15 hours ago. 7 Replies

Hi from germany,i know here is a many content about wiring plans and so on.but i need the correct wiring plan for my new dream car ;) the passenger window does not work…Continue

64 Fleetwood Trans Issues

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Tuesday. 10 Replies

I've posted a few times about the strange issue I have with the trans on my 64 Fleetwood. When it gets warm and up to temp, I loose 3rd gear, but I never loose reverse. According to multiple sources,…Continue

New Holley, but which one?

Started by Henrik Sonne in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Tuesday. 14 Replies

First I will start by saying, I am a newbie. Recently purchased a ´56 HT, which has a 390" from a ´63 in it. I have decided to put a new Holley on it, but not 100% sure which one would be the best…Continue

Shock absorbers and bolts

Started by Sammy in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

Time again to change my shocks. No matter if Gabriel,  ACDelco whatever - don't last longer than 3 or 4 years.Problem is the rubber parts thats gliding out of the bottom.But now I have another…Continue

Blog Posts


Posted by ANGELO MARTINEZ on July 23, 2023 at 10:44pm 3 Comments

  Hope someone can help me to find the harmonic balancer bolt for my 1964 Cadilac Deville 429 engine

in advance, thank you for your help.

Clock ‘64 DeVille

Posted by Matt Vander Hooven on July 23, 2023 at 7:36pm 2 Comments

Is there still a member in the Detroit area that refurbishes clocks?

Matt VH

Spark Plug Heat Range

Posted by Patrick Westphal on July 7, 2023 at 10:00am 3 Comments

I found a diagram that illustrates the main factor in determining a spark plug heat range that I was trying to describe to you during the chapter get together.

Here it is:


The main factor is the length of the ceramic insulator from the middle of the spark plug to the tip (where the spark happens)  

The insulator…


Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 

I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…



  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service