Hi guys, has anybody experiences in installing an engine oil cooler? Since I've mounted a hitch (see pics) for towing my caravan the engine is getting hotter than normally - the temp display needle is in the middle and sometimes even a little more. I've already installed an additional electrical fan in front of the radiator. I know that I need a "sandwich" plate between the oil filter and the bracket, hoses and a radiator. But does this really work and help bringing the engine temp down ? Thank you, Robert

Views: 388

Attachments:

Reply to This

Replies to This Discussion

Robert, you parked behind a toilet! Is that a appropriate for a Cadillac?

Anders, I've never recognized this. Thank you. That will help me

Robert, Does your 64 Sedan have AC. If not it did  not come with a fan shroud. Many non-AC car owners have installed the fan shroud to increase cooling capacity. Also do you have the hood to radiator shroud (masticated rubber attached with metal strip to underside of hood), and the lower radiator air deflector (metal pan) installed. Both, help direct air through the radiator and if missing can affect cooling capacity.
Also, be sure to flush out your cooling system a couple of times and replace radiator if needed. There are extra heavy duty 4 row option replacements available. You still might need extra cooling capacity pulling the caravan but these items may help. Perhaps, there are others that pull a camper such as yours that can chime in on what they have done to address engine cooling issues.

I would be more concerned with the temp of the transmission fluid. Heat kills quickly in a tranny.

On a side note; A picture of your rig all set up would make a great picture for the 2019 Cadillac calendar.

Send it to;  russ85747@hotmail.com

Forgot to ask, where did you get the hitch?

That appears to be a hidden hitch? Very nice job, i was going to do the same with my car but ive got a couple other cars to tow with if I feel the need to vacation. 

Derale cooling products have a very nice transmission cooler with an electric fan on it. They vary in price from 200 and up Canadian. I got mine from Amazon and it's an excellent unit. As Russ pointed out it probably is the transmission that's heating the engine. The transmission cooler in the radiator will heat up the engine coolant transferring the heat to the engine. It doesnt sound like its over heating horribly, the only way to be sure is to install an actual temp gauge. Make sure you are is g a good quality oil high in Zink for the flat tappet cam. Amsoil male an excellent oil called z rod. I use 3 quarts 30 weight and top off with the 50. They don't make it in 40 weight. The best spot to add the electric trans cooler is down under the car I  good air flow. I put mine on the removable drivers side inner fender. Very easy to remove the panel and service it. I also have derale rad fans and shroud and all three fans are controlled by their pulse width modulator fan controller. The car runs to cool now lol. 

Your water pump will have  a big effect on cooling, is it new?

I second Russ's need for a tranny cooler
It is often suggested to use a tranny cooler when towing --most anything
Do all of what --is necessary -to keep your drive train at the correct temps

You SB running about 200-220 degrees at the half way mark on the temp guage ( about )

Which is highish and not terrible but it would be better to lower that temp for long term use to protect the drivetrain from oil break down due to excessive heat that then damages metal parts
Fresh trans fluid would be a good idea if its condition is unknown and a trip is in the future
Do what is required to keep the drivetrain protected to help extend the joy of the car and vacation
You will be happy you did

Enjoy

Meanwhile, I've done a lot of things: fixing (bridging) the not correct working fan clutch, changing the radiator, adding a tranny cooler (no line through the radiator), additional electrical fan with a relay/switch, new (aluminium) lines and hoses with a temperature sensor/sending unit for the tranny and even more...everything works great and is so "cool". Jason, the hood to radiator shroud is there and I flushed the system several times. The hidden hitch is from a BMW E60/61 - the only one, that fits around the fuel hose and is heavy duty up to 1900 KG. With some modifications and putting in air shocks it's perfect. I am working at a BMW dealer and they give me everything I need. My next project is the cruise control. I've only got the main (working) unit for 30 bucks. I've tested it and it works fine. But I need (at least) the 2 cables. I think, they are special and that I cannot use my existing speedometer cable as the lower one. But maybe you can help me?! 

Attachments:

some more pics

Attachments:

Hi guys, although none of you notices my post/comment or me, I'm telling you about my experiences on driving my car (with the caravan) on the highway through the mountains for about 200 miles at this very hot (86 degrees) weekend in Germany: water temp shows max 167, and transmission oil temp max 180 degrees. I think, that all my work was successful. What do you think?

Sounds like you have addressed any overheating issues.  Those are nice relatively cool temps!

ps. I drove my 64 Coupe de Ville 172 miles Friday from Raleigh to Charlotte, North Carolina with the speed around 75 mph and temps in mid 80's and it pegged just over the 1/4 mark.. which is about par for the course:

RSS

Photos

  • Add Photos
  • View All

Forum

Whoa there, you want how much??

Started by Robert Gonzalez in 1963/64 Cadillac Specific Discussion 15 hours ago. 0 Replies

Ok, I’ve been on here for almost a decade. I KNOW we covet our cars and have always tried selling them at premium prices. But the bottom line, our cars rarely fetched prices over a covair. The…Continue

1964 Cadillac parts for sale... northern cali

Started by Jason in For Sale. Last reply by Jeremy yesterday. 1 Reply

Bill Hirsch cast iron gray exhaust and manifold paint (1 can) $20Bill hirsch Cadillac dark blue engine enamel high temp high gloss (2 cans) $40Convertible top latchValve coversHeadlight bezelRadioGas…Continue

Tags: Parts

63 4 door Cadillac

Started by Walt Timmerman in For Sale. Last reply by Jeremy yesterday. 7 Replies

Need to start parting this car out. Might be moving soon and if its not parted out, it'll be scrapped.Also have Motor and transmission from my 63 coupe deville for sale. will part out also.Was told…Continue

Free- 64 lower bumper bucket - Passenger side

Started by Michael Buonaccorso in For Sale. Last reply by Jeremy yesterday. 1 Reply

This is in rough shape. Not only is there rust in the usual places but it is also bent. I replaced this piece on my car after an accident, but since this is a hard to come by piece, I figured someone…Continue

Blog Posts

Rumble Sound at 55-60 mph

Posted by Ray Schick on September 20, 2021 at 10:45pm 6 Comments

64 Coupe DeVille , while driving at 55-60 mph I have a oscillating rumble sound . Steering wheel does not shake or vibrate . Transmission mount looks good .Tires were replaced 2 years ago balanced and rebalanced recently. Axel bearings were just replaced, rear differential assembly was just replaced with a Posi track ,pinion bearings good. Fresh gear lube. Driveshaft checked and balanced the other day ,new center bearing installed and new bearing carrier assembly too. Trying to figure this…

Continue

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service