Hi guys, has anybody experiences in installing an engine oil cooler? Since I've mounted a hitch (see pics) for towing my caravan the engine is getting hotter than normally - the temp display needle is in the middle and sometimes even a little more. I've already installed an additional electrical fan in front of the radiator. I know that I need a "sandwich" plate between the oil filter and the bracket, hoses and a radiator. But does this really work and help bringing the engine temp down ? Thank you, Robert

Views: 341

Attachments:

Reply to This

Replies to This Discussion

Robert, you parked behind a toilet! Is that a appropriate for a Cadillac?

Anders, I've never recognized this. Thank you. That will help me

Robert, Does your 64 Sedan have AC. If not it did  not come with a fan shroud. Many non-AC car owners have installed the fan shroud to increase cooling capacity. Also do you have the hood to radiator shroud (masticated rubber attached with metal strip to underside of hood), and the lower radiator air deflector (metal pan) installed. Both, help direct air through the radiator and if missing can affect cooling capacity.
Also, be sure to flush out your cooling system a couple of times and replace radiator if needed. There are extra heavy duty 4 row option replacements available. You still might need extra cooling capacity pulling the caravan but these items may help. Perhaps, there are others that pull a camper such as yours that can chime in on what they have done to address engine cooling issues.

I would be more concerned with the temp of the transmission fluid. Heat kills quickly in a tranny.

On a side note; A picture of your rig all set up would make a great picture for the 2019 Cadillac calendar.

Send it to;  russ85747@hotmail.com

Forgot to ask, where did you get the hitch?

That appears to be a hidden hitch? Very nice job, i was going to do the same with my car but ive got a couple other cars to tow with if I feel the need to vacation. 

Derale cooling products have a very nice transmission cooler with an electric fan on it. They vary in price from 200 and up Canadian. I got mine from Amazon and it's an excellent unit. As Russ pointed out it probably is the transmission that's heating the engine. The transmission cooler in the radiator will heat up the engine coolant transferring the heat to the engine. It doesnt sound like its over heating horribly, the only way to be sure is to install an actual temp gauge. Make sure you are is g a good quality oil high in Zink for the flat tappet cam. Amsoil male an excellent oil called z rod. I use 3 quarts 30 weight and top off with the 50. They don't make it in 40 weight. The best spot to add the electric trans cooler is down under the car I  good air flow. I put mine on the removable drivers side inner fender. Very easy to remove the panel and service it. I also have derale rad fans and shroud and all three fans are controlled by their pulse width modulator fan controller. The car runs to cool now lol. 

Your water pump will have  a big effect on cooling, is it new?

I second Russ's need for a tranny cooler
It is often suggested to use a tranny cooler when towing --most anything
Do all of what --is necessary -to keep your drive train at the correct temps

You SB running about 200-220 degrees at the half way mark on the temp guage ( about )

Which is highish and not terrible but it would be better to lower that temp for long term use to protect the drivetrain from oil break down due to excessive heat that then damages metal parts
Fresh trans fluid would be a good idea if its condition is unknown and a trip is in the future
Do what is required to keep the drivetrain protected to help extend the joy of the car and vacation
You will be happy you did

Enjoy

Meanwhile, I've done a lot of things: fixing (bridging) the not correct working fan clutch, changing the radiator, adding a tranny cooler (no line through the radiator), additional electrical fan with a relay/switch, new (aluminium) lines and hoses with a temperature sensor/sending unit for the tranny and even more...everything works great and is so "cool". Jason, the hood to radiator shroud is there and I flushed the system several times. The hidden hitch is from a BMW E60/61 - the only one, that fits around the fuel hose and is heavy duty up to 1900 KG. With some modifications and putting in air shocks it's perfect. I am working at a BMW dealer and they give me everything I need. My next project is the cruise control. I've only got the main (working) unit for 30 bucks. I've tested it and it works fine. But I need (at least) the 2 cables. I think, they are special and that I cannot use my existing speedometer cable as the lower one. But maybe you can help me?! 

Attachments:

some more pics

Attachments:

Hi guys, although none of you notices my post/comment or me, I'm telling you about my experiences on driving my car (with the caravan) on the highway through the mountains for about 200 miles at this very hot (86 degrees) weekend in Germany: water temp shows max 167, and transmission oil temp max 180 degrees. I think, that all my work was successful. What do you think?

Sounds like you have addressed any overheating issues.  Those are nice relatively cool temps!

ps. I drove my 64 Coupe de Ville 172 miles Friday from Raleigh to Charlotte, North Carolina with the speed around 75 mph and temps in mid 80's and it pegged just over the 1/4 mark.. which is about par for the course:

RSS

Photos

  • Add Photos
  • View All

Forum

Ordering Polyurethane Replacement Trailing Arm Bushings

Started by Dan McNarry in 1963/64 Cadillac Specific Discussion. Last reply by Dan McNarry 4 hours ago. 4 Replies

There seems to be growing interest in the poly bushings. In order for me to keep track of who wants bushings, please send me a message along with or in lieu of a reply to either this thread or the…Continue

What gasket or seal at the PCV pipe under intake?

Started by Tosh Dickenson in General Discussion. Last reply by Russ Austin 11 hours ago. 3 Replies

Wonder what kind of seal goes on the metal PCV pipe under the intake?  It looks like the larger part is kind of a press fit into the manifold but maybe there was a rubber gasket under the bolt that…Continue

1964 Interior AC/Heater Box Removal

Started by Travis in Restoration Discussion. Last reply by Travis 21 hours ago. 13 Replies

Newby question here!  I've read through the shop manual and as many threads as I could find on here, but I'm still stumped on exactly how to remove the interior plastic Heater/AC box from my 64 SDV…Continue

Tags: vacuum, mode, door, box, a/c

Drain plug and speedo bullet seal.

Started by Pete Grodem in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 3 Replies

Hello,Sealing  up my 63 Jetaway duel coupling and questioning the drain plug and the speedo bullet, both used an o ring for sealing. This does not seam proper as the o ring gets crushed when…Continue

Blog Posts

How to sensibly deal with the Corona Virus

Posted by Jeff Kinzler on March 14, 2020 at 5:02pm 6 Comments

https://theamericanscholar.org/covid-19-a-primer/

I found this very helpful, written by a knowledgeable authority in public health. 

Remember, Viruses are not spread by Cadillacs so get out and drive!


Safe & Healthy travels. 

Jeff Kinzler

1963 Eldorado convertible boot

Posted by Les Eastling on February 27, 2020 at 10:33am 1 Comment

I need a used convertible boot for a 63 Cadillac convertible - condition or color is not an issue since it will be used as a pattern for making a new one. One from either a 62 series convertible or an Eldorado would work. I know I am searching for hen's teeth here... but you never know unless you ask!

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service