Hi guys, has anybody experiences in installing an engine oil cooler? Since I've mounted a hitch (see pics) for towing my caravan the engine is getting hotter than normally - the temp display needle is in the middle and sometimes even a little more. I've already installed an additional electrical fan in front of the radiator. I know that I need a "sandwich" plate between the oil filter and the bracket, hoses and a radiator. But does this really work and help bringing the engine temp down ? Thank you, Robert

Views: 388

Attachments:

Reply to This

Replies to This Discussion

That is the reading my non a/c '63 has run at as long as I've had it. I call it the 5/16 mark.

Jason, you mean 80's degrees Celsius. (nice pic)

No.. I mean the outside temperature was in the 80's Fahrenheit. I believe it was about 85 Degrees most of the way.  The point was I drove the car 2 1/2 hrs, mostly at 75 mph, with temps around 85 degrees outside, (or about 29.4 degrees Celsius) and the temp gauge was just past the 1/4 mark, which has been my experience with "Dino" since I bought it in 1996.

The lower speedometer cable is very different, having a "keyed" end where it attaches to the head unit. I just sold my last one for now last month but can put you on my Wait List for another one. I do have the other top cable that goes from head unit to speedometer.  I should also have most of the other cruise control parts. Email me at jasonedge@nc.rr.com

Here is a picture of the lower "keyed" cable for reference.

Thanks for the picture. I didn't know how it looks like. Yes, please put me on the wait list. Is the upper cable different too? Do you have a picture of it? On thursday I'll invite a friend of mine who has 2 parts cars - one of it has/had cruise and I will see what is left of it. 

The cruise head unit to speedometer cable is very similar to the regular trans to speedometer cable used in non-cruise equipped cars, except it is approximately 36" long versus 64" for the standard cable. The standard cable can be used as the cruise head unit to speedometer cable, however, you will have 28" of extra cable to deal with! I checked and have 2 of the correct shorter 36" top cables. The price is $30 and would need an address to look up shipping. If interested in this cable or getting in the Wait List for the other trans to head unit cable, email me with contact info and address at jasonedge@nc.rr.com 

Robert

Looks like you hsve the engine and trans temps under control with the towing and outside temps
Good for you

Enjoy

A good number of miles --at a high rate of speed
Good to see --Dino --doing so very well to be passing that performance test
That Baby is performing --wonderfully ( and best paint too)

Enjoy

Robert

Looks to me you got some good recognition in your post and answers

Enjoy

Jason

Should we expect any less from-- MR Carnack ( THE MAGNIFICENT ) Edge --with the 64 CDV he hand built ---to absolute perfection
I really do think ---NOT !!!!!!!!!
Just cannot at all picture DINO smooking on the shoulder on the side of the highway for any reason
Yes---HIS 64 CDV is better than yours ----LOL !!!
That dam car better run real good after the energy and talet that went into that car -- and of coarse it has

Enjoy

RSS

Photos

  • Add Photos
  • View All

Forum

Whoa there, you want how much??

Started by Robert Gonzalez in 1963/64 Cadillac Specific Discussion 15 hours ago. 0 Replies

Ok, I’ve been on here for almost a decade. I KNOW we covet our cars and have always tried selling them at premium prices. But the bottom line, our cars rarely fetched prices over a covair. The…Continue

1964 Cadillac parts for sale... northern cali

Started by Jason in For Sale. Last reply by Jeremy yesterday. 1 Reply

Bill Hirsch cast iron gray exhaust and manifold paint (1 can) $20Bill hirsch Cadillac dark blue engine enamel high temp high gloss (2 cans) $40Convertible top latchValve coversHeadlight bezelRadioGas…Continue

Tags: Parts

63 4 door Cadillac

Started by Walt Timmerman in For Sale. Last reply by Jeremy yesterday. 7 Replies

Need to start parting this car out. Might be moving soon and if its not parted out, it'll be scrapped.Also have Motor and transmission from my 63 coupe deville for sale. will part out also.Was told…Continue

Free- 64 lower bumper bucket - Passenger side

Started by Michael Buonaccorso in For Sale. Last reply by Jeremy yesterday. 1 Reply

This is in rough shape. Not only is there rust in the usual places but it is also bent. I replaced this piece on my car after an accident, but since this is a hard to come by piece, I figured someone…Continue

Blog Posts

Rumble Sound at 55-60 mph

Posted by Ray Schick on September 20, 2021 at 10:45pm 6 Comments

64 Coupe DeVille , while driving at 55-60 mph I have a oscillating rumble sound . Steering wheel does not shake or vibrate . Transmission mount looks good .Tires were replaced 2 years ago balanced and rebalanced recently. Axel bearings were just replaced, rear differential assembly was just replaced with a Posi track ,pinion bearings good. Fresh gear lube. Driveshaft checked and balanced the other day ,new center bearing installed and new bearing carrier assembly too. Trying to figure this…

Continue

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Events

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service