Hi.

Can you on a 64 remove the extension housing with the gearbox still in the car? The car have the Hydramatic.

Did work on the car last night and did feel a very large play on the outgoing axle, seems like the bushing are totally gone. I Think my vibration problem comes from this and not the drive shaft sicknesses many have problem with.

Views: 43

Reply to This

Replies to This Discussion

Answer myself...
Yes you can do it according to the 1964 Cadillac Shop Manual Chapter 10 page 14 and 15 Instruction 10.
If someone have same question.

RSS

Photos

  • Add Photos
  • View All

Forum

Trunk Pull-down

Started by Brian and Dorothy Lewis in Restoration Discussion. Last reply by Jason Edge 26 minutes ago. 7 Replies

Hi gang.  While reviewing the extensive photo archives on this site, I came across an excellent series of photos documenting a trunk pull-down assembly posted by Jason Edge.  I really didn't even…Continue

Vapor Lock and how to fix it?

Started by Richard McBurney in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 5 hours ago. 8 Replies

I have a 64 Deville Convertible, keep running into the same problem - vapor lock on hot days. So far I have rebuilt the carburetor , new gas tank , but when it sits in traffic on a hot day it will…Continue

Tags: #vaporlock

Help! I need a 1964 Eldorado front left fender.

Started by Jorge M in Wanted to Buy. Last reply by Jason Edge 8 hours ago. 1 Reply

Help looking for a 1964 Eldorado front fender for a convertible.Thank you please contact djjmoreno84@gmail.comContinue

Help! I need a 64 Eldorado front left fender.

Started by Jorge M in 1963/64 Cadillac Specific Discussion. Last reply by Jorge M yesterday. 1 Reply

Hello,Some idiot just backed in to my beautiful 64 convertible Eldorado and I’m looking for a new front fender. Any leads would be appreciated.Thank you,Jorge M.Continue

Blog Posts

Frame Markings

Posted by Gene McIlroy on August 12, 2019 at 6:26pm 1 Comment

Just got my frame back from powder coating so thought I would post photos of the front and rear frame markings.…

Continue

Lining up the drive shaft

Posted by Dominic Salemi on August 12, 2019 at 5:47pm 2 Comments

Can anyone shed some light on how to position the complete drive shaft in the correct position? I want to make sure my drive shaft is installed properly.

Thanks

Dominic

Upper A Arm Rubber Bumpers

Posted by Gene McIlroy on August 12, 2019 at 1:30pm 3 Comments

I have found a very good replacement part for the Upper A Arm Bumpers.  The top part is identical to the originals the bottom can be used as is or after a few minutes with a belt sander can be ground to the V shape as the originals were.  The replacement bumpers are for a 2001 to 2005 S10 Sanoma or Blazer.  Part number is on the box in the photos.  First photo is the box next to the box is the S10 part and an original.  Next photo shows my sanded down part next to an original.…

Continue

Roof motor

Posted by Dermot Robinson on August 11, 2019 at 8:44am 2 Comments

Replacing my convertible roof motor.

Has anyone any experience or advice on replacing the roof motor on a 1964 Cadillac Deville .

Please..

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service